Files Section

2018-07-10T02:38:40Z

Toyotaboy: /* Off the shelf parts */

== Notice ==

Files located in this section are provided by Pinball Makers users and are not tested and/or confirmed to be accurate, so use them at your own risk.

If you are aware of any specific files being inaccurate or broken, please contact the administrators.

== Diagrams ==

Drawings and other diagrams with dimensions not in CAD format.

=== Cabinet ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:wpc-backbox-1.png|200px]]
|WPC Backbox (in millimeters)
|[[Media:wpc-backbox-1.png]]
|-
|[[Image:wpc-cabinet-1.png|200px]]
|WPC full cabinet cut guide for 4" x 8" plywood
|[[Media:wpc-cabinet-1.png]]
|-
|[[Image:wpc-cabinet-2.png|200px]]
|WPC Main cabinet side and back (in millimeters)
|[[Media:wpc-cabinet-2.png]]
|-
|[[Image:wpc-cabinet-3.png|200px]]
|WPC Cabinet front (in millimeters)
|[[Media:wpc-cabinet-3.png]]
|-
|[[Image:wpc-cabinet-4.png|200px]]
|WPC Cabinet front for multiple ball launchers (in millimeters)
|[[Media:wpc-cabinet-4.png]]
|-
|[[Image:SYS7Cab Upper 200wide.png|200px]]
|SYS7 Cabinet Upper (Pharaoh),Solidworks 2015
|[[Media:Pharaoh Cabinet Upper 3-6-2017.zip]]
|-
|[[Image:SYS7 Head PDF SNIP.jpg|200px]]
|SYS7 Cabinet Upper (Pharaoh), PDF
|[[Media:Pharaoh Cabinet Upper.pdf]]
|-
|[[Image:SYS7Cab Lower 200wide.png|200px]]
|SYS7 Cabinet Lower (Pharaoh),Solidworks 2015
|[[Media:Pharaoh Cabinet Lower 4-13-2017.zip]]
|-
|[[Image:SYS7 Lower PDF SNIP.jpg|200px]]
|SYS7 Cabinet Lower (Pharaoh), PDF
|[[Media:Pharaoh Cabinet Lower.pdf]]
|}

=== Playfield ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:williams-lower-playfield.png|200px]]
|WPC lower playfield dimensions (millimeter)
|[[Media:williams-lower-playfield.png]]
|-
|[[Image:williams-early-ss.jpg|200px]]
|Williams Early Solid State lower playfield
C-size for sending to print store (inches)
|[[Media:Williams_early_SS_c_size.pdf]]
|-
|[[Image:stern-lower-pf.jpg|200px]]
|Stern lower playfield
C-size for sending to print store (inches)
|[[Media:Stern_c_size.pdf]]
|}

=== Devices ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-trough-diagram.png|200px]]
|Ball Trough (6-Ball)
|[[Media:6balltrough.ai]]
|}

== Schematics ==

Files for EagleCAD or general electronic schematics.

=== Original Equipment ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:gottlieb-system-3-image.png|200px]]
|Gottlieb System 3 Driver Board
|[[Media:gottlieb-system-3.pdf]]
|-
|[[Image:wpc-sw.png|200px]]
|WPC Switch Matrix design
|[[Media:wpc-sw.pdf]]
|-
|[[Image:wpc-lamp.png|200px]]
|WPC Lamp Matrix design
|[[Media:wpc-lamp.pdf]]
|-
|[[Image:wpc-solenoid.png|200px]]
|WPC Solenoid design
|[[Media:wpc-solenoid.pdf]]
|}

== 2D CAD Drawings ==

For use in AutoCAD or DraftSight when doing playfield layout.

=== Playfields ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Williams_playfield.jpg|200px]]
|Williams Early SS playfield
|[[Media:Williams_playfield.dwg]]
|-
|[[Image:Williams_Playfield.jpg|200px]]
|Williams Early SS playfield for Sketchup
|[[Media:Williams_Blank_Playfield.skp]]
|-
|[[Image:bally-ss.jpg|200px]]
|Bally SS Blank Playfield
|[[Media:bally-blank.dwg]]
|}

=== Ball Guides ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-inlane-guide.png|200px]]
|Ball Inlane Guide
|[[Media:Ball Inlane Guide (left) - 550-5037-01.dwg]]
|-
|[[Image:ball-lane-guide-top.png|200px]]
|Ball Lane Guide Top Double Sided (03-7034) and Star Posts (03-8319) w/5-16 in rubber
|[[Media:Ball Lane Guide Top Double Sided - 03-7034 - and Star Posts - 03-8319 w 5-16 in rubber.dwg]]
|-
|[[Image:metal-post-1-7-8.png|200px]]
|Metal Post 1 7/8" (530-5005-00) with 7/16" OD Mini Post Rubber (23-6694-1)
|[[Media:Metal Post 1 7-8 in tall 530-5005-00 w 7-16 in OD Mini Post Rubber 23-6694-1.dwg]]
|-
|[[Image:metal-post-2-1-8.png|200px]]
|Metal Post 2 1/8" (530-5332-01) with Bumper Post Sleeve 1 1/16"
|[[Media:Metal Post 2 1-8 in tall 530-5332-01 w Bumper Post Sleeve 1 1-16 in.dwg]]
|-
|[[Image:plastic-post.png|200px]]
|Narrow Plastic Post (03-8365) with 3/16" rubber
|[[Media:Narrow Plastic Post 03-8365 w 3-16 in rubber.dwg]]
|-
|[[Image:spade-bolt.png|200px]]
|Spade Bolt (Offset)
|[[Media:Spade Bolt (Offset).dwg]]
|-
|[[Image:star-post.png|200px]]
|Star Post (03-8319)
|[[Media:Star Post - 03-8319.dwg]]
|-
|[[Image:shooter-lane.jpg|200px]]
|Shooter Lane Insert
|[[Media:shooter-lane.dwg]]
|}

=== Coil Assemblies ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-launcher.png|200px]]
|Ball Launcher (500-5477-01)
|[[Media:Ball Launcher 500-5477-01.dwg]]
|-
|[[Image:ball-trough.png|200px]]
|Ball Trough Assembly 4 Ball (500-6119-14) and Enter Exit Scoop (535-7329-01)
|[[Media:Ball Trough Assembly 4 Ball 500-6119-14 Enter Exit Scoop 535-7329-01.dwg]]
|-
|[[Image:flipper-left.png|200px]]
|Flipper Assembly (A-15205) w/left mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Left).dwg]]
|-
|[[Image:flipper-right.png|200px]]
|Flipper Assembly (A-15205) w/right mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Right).dwg]]
|-
|[[Image:magnet-1.png|200px]]
|Magnet Bracket (A-15257) and Magnet Coil (20-9247)
|[[Media:Magnet Bracket A-15257 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:magnet-2.png|200px]]
|Threaded Core Weld Assembly (515-6141-01) and Magnet Coil (20-9247)
|[[Media:Threaded Core Weld Assembly 515-6141-01 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:pop-bumper.png|200px]]
|Pop Bumper Assembly Williams Bally
|[[Media:Pop Bumper Assembly Williams Bally.dwg]]
|-
|[[Image:slingshot-assembly.png|200px]]
|Slingshot Assembly (500-5849-00)
|[[Media:Slingshot Assembly - 500-5849-00.dwg]]
|}

=== Inserts ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:insert-1-1-2.png|200px]]
|Insert 1 1/2" Arrow
|[[Media:Insert_1_1-2_in_Arrow.dwg]]
|-
|[[Image:insert-1-1-2-r.png|200px]]
|Insert 1 1/2" Rectangle
|[[Media:Insert_1_1-2_in_Rectangle.dwg]]
|-
|[[Image:insert-1-1-2-ro.png|200px]]
|Insert 1 1/2" Round
|[[Media:Insert_1_1-2_in_Round.dwg]]
|-
|[[Image:insert-1-3-16-r.png|200px]]
|Insert 1 3/16" Round
|[[Media:Insert_1_3-16_in_Round.dwg]]
|-
|[[Image:insert-1-3-16-t.png|200px]]
|Insert 1 3/16" Triangle
|[[Media:Insert_1_3-16_in_Triangle.dwg]]
|-
|[[Image:insert-1-5-8.png|200px]]
|Insert 1 5/8" Oval
|[[Media:Insert_1_5-8_in_Oval.dwg]]
|-
|}

=== Lights ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:socket-l.png|200px]]
|44 Socket Under Playfield Long (077-5005-00)
|[[Media:Socket Under Playfield Long 077-5005-00.dwg]]
|-
|[[Image:socket-s-1.png|200px]]
|44 Socket Under Playfield Short (077-5002-00)
|[[Media:Socket Under Playfield Short 077-5002-00.dwg]]
|-
|[[Image:socket-s-2.png|200px]]
|89 Socket Under Playfield Short (077-5101-00)
|[[Media:Socket Under Playfield Short 077-5101-00.dwg]]
|}
=== Switches ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:switch.png|200px]]
|Rollover Switch and Bracket (A-12688)
|[[Media:Rollover Switch and Bracket A-12688.dwg]]
|-
|[[Image:spinner-assembly.png|200px]]
|Spinner Assembly (A-21801-2)
|[[Media:Spinner Assembly A-21801-2.dwg]]
|-
|[[Image:standup-target.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4)
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4.dwg]]
|-
|[[Image:standup-target-2.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 2
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 2).dwg]]
|-
|[[Image:standup-target-3.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 3
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 3).dwg]]
|-
|[[Image:5-target-bank.png|200px]]
|Drop Target Bank of 5
|[[Media:Drop Target Bank of 5.dwg]]
|}

== 3D templates ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:pop-bumper-template.jpg|200px]]
|Williams Pop Bumper Template
|[[File:pop-bumper-template.stl]]
|-
|[[Image:pop-bumper-template-center.jpg|200px]]
|Williams Pop Bumper Template Center Holes
|[[File:pop-bumper-template-center.stl]]
|-
|[[Image:sling-template.png|200px]]
|Williams Slingshot Template
|[[File:slingshot-template.stl]]
|-
|[[Image:sling-template-center.png|200px]]
|Williams Slingshot Template Center Holes
|[[File:sling-template-center.stl]]
|}

== Off the shelf parts ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Lamp Socket 077-5030-00.png|200px]]
|555 Lamp Socket 077-5030-00
Solidworks 2013
|[[Media:Lamp Socket 077-5030-00.zip]]
|-
|[[Image:Lamp Socket F1P-E-12-07-00.png|200px]]
|44 Socket Staple Down F1P-E-12-07-00
Solidworks 2013
|[[Media:Lamp Socket F1P-E-12-07-00.zip]]
|-
|[[Image:Lamp Socket F1P-E-12-06-00.png|200px]]
|44 Socket Under Playfield F1P-E-12-06-00
Solidworks 2013
|[[Media:Lamp Socket F1P-E-12-06-00.zip]]
|-
|[[Image:Lamp Socket Bally E-120-81.png|200px]]
|44 Socket Under Playfield Short (Bally E-120-81)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-81.zip]]
|-
|[[Image:Lamp Socket Bally E-120-99.PNG|200px]]
|44 Socket Under Playfield Flush (Bally E-120-99)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-99.zip]]
|-
|[[Image:Lamp Socket Bally E-120-162.png|200px]]
|44 Socket Under Playfield (Bally E-120-162)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-162.zip]]
|-
|[[Image:Lamp Socket Bally- Possibly E-120-84.png|200px]]
|44 Socket Under Playfield (Possibly Bally E-120-84)
Solidworks 2013
|[[Media:Lamp Socket Bally- Possibly E-120-84.zip]]
|-
|[[Image:Lamp Socket A-8798.png|200px]]
|89 Lamp Socket A-8798
Solidworks 2013
|[[Media:Lamp Socket A-8798.zip]]
|-
|[[Image:Led bulb.jpg|200px]]
|LED bulb
Solidworks 2014
|[[Media:Led bulb.SLDPRT]]
|-
|[[Image:WPC Trough.png|200px]]
|WPC Trough Assembly
Solidworks 2013
|[[Media:WPC Trough.zip]]
|-
|[[Image:SHooter Lane Kicker Assembly A-21022-1.png|200px]]
|Shooter lane Kicker Assembly A-21022-1
Solidworks 2015
|[[Media:Shooter Lane Kicker Assembly A-21022-1.zip]]
|-
|[[Image:Pop Bumper ASSY B-9414.png|200px]]
|WPC Pop Bumper Assembly
Solidworks 2013
|[[Media:WPC Pop Bumper Assy B-9414.zip]]
|-
|[[Image:3 Bank Drop Target ASSY D-7931-3S.png|200px]]
|3 bank Drop Target SYS 7
Solidworks 2013
|[[Media:3 Bank Drop Target ASSY D-7931-3S.zip]]
|-
|[[Image:3 Bank Drop Target Sys11.png|200px]]
|3 bank Drop Target SYS11
Solidworks 2013
|[[Media:3 bank Sys11 Drop Target Bank.zip]]
|-
|[[Image:5 Bank JD Drop Target Bank A-16947.png|200px]]
|5 Bank JD Drop Target Bank A-16947
Solidworks 2015
|[[Media:5 Bank JD Drop Target Bank A-16947.zip]]
|-
|[[Image:Target 03-8033.png|200px]]
|Drop Target Wedge Top
Solidworks 2013
|[[Media:Target 03-8033.SLDPRT]]
|-
|[[Image:Kicker Arm Sllingshot Assembly B-12665.png|200px]]
|Kicker Arm Slingshot Assembly B-12665
Solidworks 2013
|[[Media:Kicker Arm Sllingshot Assembly B-12665.zip]]
|-
|[[Image:Kickout Hole SYS7.png|200px]]
|Kickout Hole Sys 7
Solidworks 2013
|[[Media:Kickout Hole SYS7.zip]]
|-
|[[Image:Switch Rollover - Sys7.png|200px]]
|Rollover Lane Switch Sys7
Solidworks 2015
|[[Media:Switch Rollover - Sys7.zip]]
|-
|[[Image:Rollover Lane Switch.png|200px]]
|Rollover Lane Microswitch
Solidworks 2013
|[[Media:Rollover Lane Switch.zip]]
|-
|[[Image:Target 002 Assy.png|200px]]
|Target 002
Solidworks 2013
|[[Media:Target 002 Assy.zip]]
|-
|[[Image:Target 003 Assy.png|200px]]
|Target 003
Solidworks 2013
|[[Media:Target 003 Assy.zip]]
|-
|[[Image:Target 004 Assy.png|200px]]
|Target 004
Solidworks 2013
|[[Media:Target 004 Assy.zip]]
|-
|[[Image:Target 005 Assy.png|200px]]
|Target 005
Solidworks 2013
|[[Media:Target 005 Assy.zip]]
|-
|[[Image:Star Post PL-00172-OT.png|200px]]
|Star Post 1" - PL-00172-OT
Solidworks 2013
|[[Media:Star Post PL-00172-OT.SLDPRT]]
|-
|[[Image:Star Post 1-1'16 -03-8319-13.png|200px]]
|Star Post 1-1/16"" - 03-8319-13
Solidworks 2013
|[[Media:Star Post 1-1'16 -03-8319-13.SLDPRT]]
|-
|[[Image:Star Post 1-3'16 -03-8370-10.png|200px]]
|Star Post 1-3/16"" - 03-8370-10
Solidworks 2013
|[[Media:Star Post 1-3'16 -03-8370-10.SLDPRT]]
|-
|[[Image:Double Star Post 1-1^2 -03-8130-9.png|200px]]
|Double Star Post - 1-1/2" 03-8130-9
Solidworks 2013
|[[Media:Double Star Post 1-1^2 -03-8130-9.SLDPRT]]
|-
|[[Image:Double Star Post .png|200px]]
|Double Star Post - 1-1/16" 03-8247-13
Solidworks 2013
|[[Media:Double Star Post.SLDPRT]]
|-
|[[Image:Post Faceted 1 inch C-11561-20 .png|200px]]
|Post Faceted 1" C-11561-20
Solidworks 2013
|[[Media:Post Faceted 1 inch C-11561-20.SLDPRT]]
|-
|[[Image:Post Faceted 1-3`16 C-11562-20.png|200px]]
|Post Faceted 1-3/16" C-11562-20
Solidworks 2013
|[[Media:Post Faceted 1-3`16 C-11562-20.SLDPRT]]
|-
|[[Image:Post 1 inch Concentric Fin C-951-4 .png|200px]]
|Post 1" Concentric Fin C-951-4
Solidworks 2013
|[[Media:Post 1 inch Concentric Fin C-951-4.SLDPRT]]
|-
|[[Image:Post 1-1`8 Concentric Fin C-952-7 .png|200px]]
|Post 1-1/8" Concentric Fin C-952-7
Solidworks 2013
|[[Media:Post 1-1`8 Concentric Fin C-952-7.SLDPRT]]
|-
|[[Image:Mini Post - Plastic 550-5052-02 .png|200px]]
|Mini Post - Plastic 550-5052-02
Solidworks 2013
|[[Media:Mini Post - Plastic 550-5052-02.SLDPRT]]
|-
|[[Image:Bumper Post 8-32 Thread bottom 6-32 at Top 024056 .png|200px]]
|Bumper Post 8-32 Thread at Bottom, 6-32 at Top 02-4056
Solidworks 2013
|[[Media:Bumper Post 8-32 Thread bottom 6-32 at Top 024056.SLDPRT]]
|-
|[[Image:Mini Post 6-32 Thread 02-4195.png|200px]]
|Mini Post 6-32 Thread 02-4195
Solidworks 2013
|[[Media:Mini Post 6-32 Thread 02-4195.SLDPRT]]
|-
|[[Image:Mini Post 8-32 Thread.png|200px]]
|Mini Post 8-32 Thread
Solidworks 2013
|[[Media:Mini Post 8-32 Thread.SLDPRT]]
|-
|[[Image:Mini Post 10-32 Thread.png|200px]]
|Mini Post 10-32 Thread
Solidworks 2013
|[[Media:Mini Post 10-32 Thread.SLDPRT]]
|-
|[[Image:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.png|200px]]
|Post-Dual Ring 8-32 Thread at Bottom, 6-32 at top 02-4423
Solidworks 2013
|[[Media:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0001.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-5/8"
Solidworks 2013
|[[Media:Threaded Post Screw 0001.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0002.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-1/2"
Solidworks 2013
|[[Media:Threaded Post Screw 0002.SLDPRT]]
|-
|[[Image:Rubber Post Cap.png|200px]]
|Rubber Post Cap
Solidworks 2013
|[[Media:Rubber Post Cap.SLDPRT]]
|-
|[[Image:Insert - 1 inch RND PL-1ROT.png|200px]]
|1" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1 inch RND PL-1ROT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch RND PL-1316RBT.png|200px]]
|1-3/16" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1-3`16 inch RND PL-1316RBT.SLDPRT]]
|-
|[[Image:Insert - 5`8 inch RND PL-58ROS.png|200px]]
|5/8" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 5`8 inch RND PL-58ROS.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch RND PL-34RAS.png|200px]]
|3/4" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch RND PL-34RAS.SLDPRT]]
|-
|[[Image:Insert - 1-1`2 inch RND PL-112ROT.png|200px]]
|1-1/2" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1-1`2 inch RND PL-112ROT.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch Square PL-34SSB.png|200px]]
|3/4" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch Square PL-34SSB.SLDPRT]]
|-
|[[Image:Insert - 1inch Square PL-1SSG.png|200px]]
|1" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1inch Square PL-1SSG.SLDPRT]]
|-
|[[Image:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.png|200px]]
|3/4 x 1-1/2" Rectangular Insert - "Grid" Pattern
Solidworks 2013
|[[Media:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.SLDPRT]]
|-
|[[Image:Insert - 1-5`8 inch OVAL PI-11234--OGT.png|200px]]
|3/4 x 1-5/8" Oval Insert
Solidworks 2013
|[[Media:Insert - 1-5`8 inch OVAL PI-11234--OGT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch Tri PI-1316TOS.png|200px]]
|1-3/6"" Triangular Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`16 inch Tri PI-1316TOS.SLDPRT]]
|-
|[[Image:Insert - 1-3`4 inch Diamond PL-134DBT.png|200px]]
|1-3/4 x 3/4"" Diamond Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`4 inch Diamond PL-134DBT.SLDPRT]]
|-
|[[Image:Insert 1-1'2 inch Triangle PI-112TGT.png|200px]]
|1-1/2" Triangle Insert - "Starburst" Pattern PI-112TGT
Solidworks 2013
|[[Media:Insert 1-1'2 inch Triangle PI-112TGT.SLDPRT]]
|-
|[[Image:Insert 2 inch Arrow PI-T2RT.png|200px]]
|2" Triangle Insert - "Starburst" Pattern PI-T2RT
Solidworks 2013
|[[Media:Insert 2 inch Arrow PI-T2RT.SLDPRT]]
|-
|[[Image:Insert 2-1'2 inch Arrow 03-8359-9.png|200px]]
|2-1/2" Arrow Insert - 03-8359-9
Solidworks 2013
|[[Media:Insert 2-1'2 inch Arrow 03-8359-9.SLDPRT]]
|-
|[[Image:Lightning_insert.jpg|200px]]
|Lightning Insert - PI-3-LO
Solidworks 2014
|[[Media:Lightning_insert.SLDPRT]]
|-
|[[Image:Rollover C-901.png|200px]]
|Rollover Insert C-901
Solidworks 2013
|[[Media:Rollover C-9901.zip]]
|-
|[[Image:Lane Guide 03-8318-25.PNG|200px]]
|Lane Guide 03-8318-25
Solidworks 2013
|[[Media:Lane Guide 03-8318-25.SLDPRT]]
|-
|[[Image:Lane Guide.PNG|200px]]
|Lane Guide
Solidworks 2013
|[[Media:Lane Guide.SLDPRT]]
|-
|[[Image:Ball Gate Assembly - RT A-8096-R.PNG|200px]]
|Ball Gate Assembly - RT A-8096-R
Solidworks 2013
|[[Media:Ball Gate Assembly - RT A-8096-R.ZIP]]
|-
|[[Image:Stern-spinner-511-5113-00.jpg|200px]]
|Stern Spinner 511-5113-00
Solidworks 2014
|[[Media:Stern-511-5113-00.zip]]
|-
|[[Image:Gate Assy 0001.PNG|200px]]
|Ball Gate Assembly -
Solidworks 2013
|[[Media:Gate Assy 0001.zip]]
|-
|[[Image:Flipper Assembly WPC.png|200px]]
|Flipper Assembly WPC (coil is incorrect)
Solidworks 2013
|[[Media:Flipper Assembly WPC.zip]]
|-
|[[Image:Flipper Bat 2inch.PNG|200px]]
|Flipper Bat 2 Inch
Solidworks 2013
|[[Media:Flipper Bat 2inch.zip]]
|-
|[[Image:Flipper Bat 3inch.PNG|200px]]
|Flipper Bat 3 inch
Solidworks 2013
|[[Media:Flipper Bat 3inch.zip]]
|-
|[[Image:03-7568 flipper bushing.jpg|200px]]
|Bally / Williams Bushing
Solidworks 2014
|[[Media:03-7568 flipper bushing SW.SLDPRT]]
|-
|[[Image:Opto Base MTG.png|200px]]
|Opto Base Mounting
Solidworks 2013
|[[Media:Opto Base MTG.sldprt]]
|-
|[[Image:PF Test1.PNG|200px]]
|Test PF shooter lane cut
Solidworks 2013
|[[Media:Test PF 1.sldprt]]
|-
|[[Image:Inlane_williams_plastic.jpg|200px]]
|Williams Inlane
Solidworks 2014
|[[Media:Inlane_williams_plastic.SLDPRT]]
|-
|[[Image:Inlane_de-sega-stern_plastic.jpg|200px]]
|Data East / SEGA / Stern
Solidworks 2014
|[[Media:Inlane DE-sega-stern.SLDPRT]]
|-
|[[Image:Apron_stern.jpg|200px]]
| Stern
Solidworks 2014
|[[Media:Apron stern.SLDPRT]]
|}

== Non Standard Parts ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Wireform bracket.jpg|200px]]
| 3d printable wireform bracket to be used with any 1/8" round material (ABS, steel, polyethylene tubing, etc)
Solidworks 2014
|[[Media:Wireform bracket.SLDPRT]]
|-
|[[Image:Loop_da_loop_ramp.jpg|200px]]
| 3d printable loop da loop ramp
Solidworks 2014
|[[Media:Loop_da_loop_ramp.SLDPRT]]
|-
|[[Image:Vertical loop ramp.jpg|200px]]
| 3d printable vertical loopback ramp
Solidworks 2014
|[[Media:Vertical loop ramp.SLDPRT]]
|}

File:03-7568 flipper bushing SW.SLDPRT

2018-07-10T02:37:32Z

Toyotaboy: solidworks 2014 - bally / williams flipper bushing 03-7568

solidworks 2014 - bally / williams flipper bushing 03-7568

File:03-7568 flipper bushing.jpg

2018-07-10T02:36:22Z

Toyotaboy: standard bally / williams bushing

standard bally / williams bushing

Ghost in the shell

Van Halen

2017-05-17T02:55:48Z

Toyotaboy: /* Construction Photos */

=== Van Halen ===

{|class="wikitable"
!Name
!Title
|-
|Hugh Spahr
|Project Owner, Electrical Engineer & Programmer
|}

{|class="wikitable"
!Name
!Title
|-
|Joe Zenkus
|Graphic Artist
|}

==== Game Summary ====
This will be taking the layout of a Dolly Parton. The latest OPP boards will be wired into the existing harness to rewrite the rules. All new artwork will be created for the playfield, plastics, cabinet, backbox. Since this is an old Bally cabinet, there will be a new speaker box mounted as a topper to get stereo sound.

Since most Van halen fans are very passionate about Roth Vs Hagar, both are included and you must choose a side before starting the game. Whoever you chose, you must complete their letters first. If you spell letters from the other band leader, you will get negative points. This is perhaps a first in pinball rules.

One physical change to the layout is the lane that puts the ball back into the shooter lane. This is being converted into a captive ball.

==== External Link ====

[https://openpinballproject.wordpress.com Open pinball project]

==== External References ====

==== Finished Photos ====

==== Construction Photos ====
Art is being laid out on the playfield virtually initially:

[[File:Van_halen_dolly.jpg]]

Cabinet painted and backglass / LCD done

[[File:halen_work_in_progress.jpg]]

Van Halen

2017-05-17T02:55:36Z

Toyotaboy: /* Construction Photos */

=== Van Halen ===

{|class="wikitable"
!Name
!Title
|-
|Hugh Spahr
|Project Owner, Electrical Engineer & Programmer
|}

{|class="wikitable"
!Name
!Title
|-
|Joe Zenkus
|Graphic Artist
|}

==== Game Summary ====
This will be taking the layout of a Dolly Parton. The latest OPP boards will be wired into the existing harness to rewrite the rules. All new artwork will be created for the playfield, plastics, cabinet, backbox. Since this is an old Bally cabinet, there will be a new speaker box mounted as a topper to get stereo sound.

Since most Van halen fans are very passionate about Roth Vs Hagar, both are included and you must choose a side before starting the game. Whoever you chose, you must complete their letters first. If you spell letters from the other band leader, you will get negative points. This is perhaps a first in pinball rules.

One physical change to the layout is the lane that puts the ball back into the shooter lane. This is being converted into a captive ball.

==== External Link ====

[https://openpinballproject.wordpress.com Open pinball project]

==== External References ====

==== Finished Photos ====

==== Construction Photos ====
Art is being laid out on the playfield virtually initially:

[[File:Van_halen_dolly.jpg]]

Cabinet painted and backglass / LCD done
[[File:halen_work_in_progress.jpg]]

File:Halen work in progress.jpg

2017-05-17T02:54:36Z

Toyotaboy:

Lost

2017-05-04T11:20:06Z

2017-05-04T11:02:53Z

Toyotaboy: /* Game Summary */

=== Van Halen ===

{|class="wikitable"
!Name
!Title
|-
|Hugh Spahr
|Project Owner, Electrical Engineer & Programmer
|}

{|class="wikitable"
!Name
!Title
|-
|Joe Zenkus
|Graphic Artist
|}

==== Game Summary ====
This will be taking the layout of a Dolly Parton. The latest OPP boards will be wired into the existing harness to rewrite the rules. All new artwork will be created for the playfield, plastics, cabinet, backbox. Since this is an old Bally cabinet, there will be a new speaker box mounted as a topper to get stereo sound.

Since most Van halen fans are very passionate about Roth Vs Hagar, both are included and you must choose a side before starting the game. Whoever you chose, you must complete their letters first. If you spell letters from the other band leader, you will get negative points. This is perhaps a first in pinball rules.

One physical change to the layout is the lane that puts the ball back into the shooter lane. This is being converted into a captive ball.

==== External Link ====

[https://openpinballproject.wordpress.com Open pinball project]

==== External References ====

==== Finished Photos ====

==== Construction Photos ====
Art is being laid out on the playfield virtually initially:

[[File:Van_halen_dolly.jpg]]

Van Halen

2017-05-04T10:59:03Z

Toyotaboy:

2017-03-16T15:08:46Z

Toyotaboy: /* Finished Photos */

=== SharpeShooterlII ===

{|class="wikitable"
!Name
!Title
|-
|Hugh Spahr
|Project Owner, Electrical Engineer & Programmer
|}

{|class="wikitable"
!Name
!Title
|-
|Joe Zenkus
|Graphic Artist, LCD Images, Voice Callouts
|}

==== Game Summary ====
Retheme of a Sharp Shooter 2 pinball with all new electronics and code, debuted at Pintastic in New England in 2015. Game features eleven modes, and four difficulty levels. After all modes are completed, the difficulty level is increased. The game continues to be a work in progress. Game was envisioned as a test bed for the open pinball project (OPP) hardware, framework and documentation.

Game started as populated Sharp Shooter 2 playfield. Cabinet was originally Gottlieb Gladiator. Backbox was from Secret Service machine. Electronics use OPP boards for driving solenoids, reading inputs, and turning on/off feature lights. Scores are displayed using an LCD monitor with some rudimentary animations during attract mode.

==== External Link ====

[https://openpinballproject.wordpress.com Open pinball project]

[https://www.youtube.com/channel/UC05iZ0O7hRWYi1VuTQN1-7Q Youtube Channel]

==== External References ====

==== Finished Photos ====
[[File:Sharpe_shooter3_cabinet.jpg]]

==== Construction Photos ====

https://openpinballproject.files.wordpress.com/2015/05/whiteplayfield_sm.jpg

File:Sharpe shooter3 playfield.jpg

2017-03-16T15:08:20Z

Toyotaboy:

File:Sharpe shooter3 cabinet.jpg

2017-03-16T15:07:59Z

Toyotaboy:

SharpeShooter III

2017-03-16T15:06:01Z

Toyotaboy: /* External Link */

=== SharpeShooterlII ===

{|class="wikitable"
!Name
!Title
|-
|Hugh Spahr
|Project Owner, Electrical Engineer & Programmer
|}

{|class="wikitable"
!Name
!Title
|-
|Joe Zenkus
|Graphic Artist, LCD Images, Voice Callouts
|}

==== Game Summary ====
Retheme of a Sharp Shooter 2 pinball with all new electronics and code, debuted at Pintastic in New England in 2015. Game features eleven modes, and four difficulty levels. After all modes are completed, the difficulty level is increased. The game continues to be a work in progress. Game was envisioned as a test bed for the open pinball project (OPP) hardware, framework and documentation.

Game started as populated Sharp Shooter 2 playfield. Cabinet was originally Gottlieb Gladiator. Backbox was from Secret Service machine. Electronics use OPP boards for driving solenoids, reading inputs, and turning on/off feature lights. Scores are displayed using an LCD monitor with some rudimentary animations during attract mode.

==== External Link ====

[https://openpinballproject.wordpress.com Open pinball project]

[https://www.youtube.com/channel/UC05iZ0O7hRWYi1VuTQN1-7Q Youtube Channel]

==== External References ====

==== Finished Photos ====

==== Construction Photos ====

https://openpinballproject.files.wordpress.com/2015/05/whiteplayfield_sm.jpg

SharpeShooter III

2017-03-16T15:05:46Z

Toyotaboy: /* External Link */

=== SharpeShooterlII ===

{|class="wikitable"
!Name
!Title
|-
|Hugh Spahr
|Project Owner, Electrical Engineer & Programmer
|}

{|class="wikitable"
!Name
!Title
|-
|Joe Zenkus
|Graphic Artist, LCD Images, Voice Callouts
|}

==== Game Summary ====
Retheme of a Sharp Shooter 2 pinball with all new electronics and code, debuted at Pintastic in New England in 2015. Game features eleven modes, and four difficulty levels. After all modes are completed, the difficulty level is increased. The game continues to be a work in progress. Game was envisioned as a test bed for the open pinball project (OPP) hardware, framework and documentation.

Game started as populated Sharp Shooter 2 playfield. Cabinet was originally Gottlieb Gladiator. Backbox was from Secret Service machine. Electronics use OPP boards for driving solenoids, reading inputs, and turning on/off feature lights. Scores are displayed using an LCD monitor with some rudimentary animations during attract mode.

==== External Link ====

[https://openpinballproject.wordpress.com Open pinball project]
[https://www.youtube.com/channel/UC05iZ0O7hRWYi1VuTQN1-7Q Youtube Channel]

==== External References ====

==== Finished Photos ====

==== Construction Photos ====

https://openpinballproject.files.wordpress.com/2015/05/whiteplayfield_sm.jpg

Custom Games

2017-02-26T19:42:59Z

Toyotaboy:

Information about building your own pinball machine wouldn't be complete without some examples of projects created by home hobbyists.

<font size="4">

* [[Angry Birds]]
* [[Bill Paxton]]
* [[Bioshock]]
* [[Blue October]]
* [[Buffy Vampire Slayer]]
* [[Coconut Island Pinball]]
* [[DeadPin]]
*[[Duck Hunt]]
* [[Evil Dead]]
* [[Ferrari]]
* [[Futurama]]
* [[Game of Thrones]]
* [[Ghostbusters]]
* [[Godzilla]]
*[[Goonies]]
* [https://pinside.com/pinball/forum/topic/haunted-cruise-new-pinball2000-kit Haunted Cruise]
* [[Indiana Jones (Stern & Williams)]]
* [[Iron Maiden]]
* [[Kugler Family]]
* [[Lost]]
* [[Metallica (earthshaker retheme)]]
* [[The Nightmare Before Christmas]]
* [[Ramones]]
* [[Rhett & Link]]
* [[Rush]]
* [[SharpeShooter III]]
* [[Slayer]]
* [[Sonic]]
* [[Skyrim]]
* [[Spaceballs]]
* [[Three Stooges]]
* [https://pinside.com/pinball/forum/topic/whirlwind-software-rewrite-the-journey Whirlwind]
* [[Van Halen]]
* [[Wrath of Olympus]]
* [http://www.linscustompins.com/?page_id=28 Tail of the Dragon]

</font>

LIONMAN

2017-02-26T19:42:26Z

Toyotaboy: /* LIONMAN */