Pinball Makers (Staging) - User contributions [en]

Files Section

2017-04-18T05:49:56Z

BobLangelius: /* Off the shelf parts */

== Notice ==

Files located in this section are provided by Pinball Makers users and are not tested and/or confirmed to be accurate, so use them at your own risk.

If you are aware of any specific files being inaccurate or broken, please contact the administrators.

== Diagrams ==

Drawings and other diagrams with dimensions not in CAD format.

=== Cabinet ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:wpc-backbox-1.png|200px]]
|WPC Backbox (in millimeters)
|[[Media:wpc-backbox-1.png]]
|-
|[[Image:wpc-cabinet-1.png|200px]]
|WPC full cabinet cut guide for 4" x 8" plywood
|[[Media:wpc-cabinet-1.png]]
|-
|[[Image:wpc-cabinet-2.png|200px]]
|WPC Main cabinet side and back (in millimeters)
|[[Media:wpc-cabinet-2.png]]
|-
|[[Image:wpc-cabinet-3.png|200px]]
|WPC Cabinet front (in millimeters)
|[[Media:wpc-cabinet-3.png]]
|-
|[[Image:wpc-cabinet-4.png|200px]]
|WPC Cabinet front for multiple ball launchers (in millimeters)
|[[Media:wpc-cabinet-4.png]]
|-
|[[Image:SYS7Cab Upper 200wide.png|200px]]
|SYS7 Cabinet Upper (Pharaoh),Solidworks 2015
|[[Media:Pharaoh Cabinet Upper 3-6-2017.zip]]
|-
|[[Image:SYS7 Head PDF SNIP.jpg|200px]]
|SYS7 Cabinet Upper (Pharaoh), PDF
|[[Media:Pharaoh Cabinet Upper.pdf]]
|-
|[[Image:SYS7Cab Lower 200wide.png|200px]]
|SYS7 Cabinet Lower (Pharaoh),Solidworks 2015
|[[Media:Pharaoh Cabinet Lower 4-13-2017.zip]]
|-
|[[Image:SYS7 Lower PDF SNIP.jpg|200px]]
|SYS7 Cabinet Lower (Pharaoh), PDF
|[[Media:Pharaoh Cabinet Lower.pdf]]
|}

=== Playfield ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:williams-lower-playfield.png|200px]]
|WPC lower playfield dimensions (millimeter)
|[[Media:williams-lower-playfield.png]]
|-
|[[Image:williams-early-ss.jpg|200px]]
|Williams Early Solid State lower playfield
C-size for sending to print store (inches)
|[[Media:Williams_early_SS_c_size.pdf]]
|-
|[[Image:stern-lower-pf.jpg|200px]]
|Stern lower playfield
C-size for sending to print store (inches)
|[[Media:Stern_c_size.pdf]]
|}

=== Devices ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-trough-diagram.png|200px]]
|Ball Trough (6-Ball)
|[[Media:6balltrough.ai]]
|}

== Schematics ==

Files for EagleCAD or general electronic schematics.

=== Original Equipment ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:gottlieb-system-3-image.png|200px]]
|Gottlieb System 3 Driver Board
|[[Media:gottlieb-system-3.pdf]]
|-
|[[Image:wpc-sw.png|200px]]
|WPC Switch Matrix design
|[[Media:wpc-sw.pdf]]
|-
|[[Image:wpc-lamp.png|200px]]
|WPC Lamp Matrix design
|[[Media:wpc-lamp.pdf]]
|-
|[[Image:wpc-solenoid.png|200px]]
|WPC Solenoid design
|[[Media:wpc-solenoid.pdf]]
|}

== 2D CAD Drawings ==

For use in AutoCAD or DraftSight when doing playfield layout.

=== Playfields ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Williams_playfield.jpg|200px]]
|Williams Early SS playfield
|[[Media:Williams_playfield.dwg]]
|-
|[[Image:Williams_Playfield.jpg|200px]]
|Williams Early SS playfield for Sketchup
|[[Media:Williams_Blank_Playfield.skp]]
|-
|[[Image:bally-ss.jpg|200px]]
|Bally SS Blank Playfield
|[[Media:bally-blank.dwg]]
|}

=== Ball Guides ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-inlane-guide.png|200px]]
|Ball Inlane Guide
|[[Media:Ball Inlane Guide (left) - 550-5037-01.dwg]]
|-
|[[Image:ball-lane-guide-top.png|200px]]
|Ball Lane Guide Top Double Sided (03-7034) and Star Posts (03-8319) w/5-16 in rubber
|[[Media:Ball Lane Guide Top Double Sided - 03-7034 - and Star Posts - 03-8319 w 5-16 in rubber.dwg]]
|-
|[[Image:metal-post-1-7-8.png|200px]]
|Metal Post 1 7/8" (530-5005-00) with 7/16" OD Mini Post Rubber (23-6694-1)
|[[Media:Metal Post 1 7-8 in tall 530-5005-00 w 7-16 in OD Mini Post Rubber 23-6694-1.dwg]]
|-
|[[Image:metal-post-2-1-8.png|200px]]
|Metal Post 2 1/8" (530-5332-01) with Bumper Post Sleeve 1 1/16"
|[[Media:Metal Post 2 1-8 in tall 530-5332-01 w Bumper Post Sleeve 1 1-16 in.dwg]]
|-
|[[Image:plastic-post.png|200px]]
|Narrow Plastic Post (03-8365) with 3/16" rubber
|[[Media:Narrow Plastic Post 03-8365 w 3-16 in rubber.dwg]]
|-
|[[Image:spade-bolt.png|200px]]
|Spade Bolt (Offset)
|[[Media:Spade Bolt (Offset).dwg]]
|-
|[[Image:star-post.png|200px]]
|Star Post (03-8319)
|[[Media:Star Post - 03-8319.dwg]]
|-
|[[Image:shooter-lane.jpg|200px]]
|Shooter Lane Insert
|[[Media:shooter-lane.dwg]]
|}

=== Coil Assemblies ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-launcher.png|200px]]
|Ball Launcher (500-5477-01)
|[[Media:Ball Launcher 500-5477-01.dwg]]
|-
|[[Image:ball-trough.png|200px]]
|Ball Trough Assembly 4 Ball (500-6119-14) and Enter Exit Scoop (535-7329-01)
|[[Media:Ball Trough Assembly 4 Ball 500-6119-14 Enter Exit Scoop 535-7329-01.dwg]]
|-
|[[Image:flipper-left.png|200px]]
|Flipper Assembly (A-15205) w/left mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Left).dwg]]
|-
|[[Image:flipper-right.png|200px]]
|Flipper Assembly (A-15205) w/right mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Right).dwg]]
|-
|[[Image:magnet-1.png|200px]]
|Magnet Bracket (A-15257) and Magnet Coil (20-9247)
|[[Media:Magnet Bracket A-15257 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:magnet-2.png|200px]]
|Threaded Core Weld Assembly (515-6141-01) and Magnet Coil (20-9247)
|[[Media:Threaded Core Weld Assembly 515-6141-01 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:pop-bumper.png|200px]]
|Pop Bumper Assembly Williams Bally
|[[Media:Pop Bumper Assembly Williams Bally.dwg]]
|-
|[[Image:slingshot-assembly.png|200px]]
|Slingshot Assembly (500-5849-00)
|[[Media:Slingshot Assembly - 500-5849-00.dwg]]
|}

=== Inserts ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:insert-1-1-2.png|200px]]
|Insert 1 1/2" Arrow
|[[Media:Insert 1 1-2 in Arrow.dwg]]
|-
|[[Image:insert-1-1-2-r.png|200px]]
|Insert 1 1/2" Rectangle
|[[Media:Insert 1 1-2 in Rectangle.dwg]]
|-
|[[Image:insert-1-1-2-ro.png|200px]]
|Insert 1 1/2" Round
|[[Media:Insert 1 1-2 in Round.dwg]]
|-
|[[Image:insert-1-3-16-r.png|200px]]
|Insert 1 3/16" Round
|[[Media:Insert 1 3-16 in Round.dwg]]
|-
|[[Image:insert-1-3-16-t.png|200px]]
|Insert 1 3/16" Triangle
|[[Media:Insert 1 3-16 in Triangle.dwg]]
|-
|[[Image:insert-1-5-8.png|200px]]
|Insert 1 5/8" Oval
|[[Media:Insert 1 5-8 in Oval.dwg]]
|-
|[[Image:insert-1-s.png|200px]]
|Insert 1" Square
|[[Media:Insert 1 in Square.dwg]]
|-
|[[Image:insert-1-r.png|200px]]
|Insert 1" Round
|[[Media:Insert 1 in Round.dwg]]
|-
|[[Image:insert-2-a.png|200px]]
|Insert 2" Arrow
|[[Media:Insert 2 in Arrow.dwg]]
|-
|[[Image:insert-3-4-r.png|200px]]
|Insert 3/4" Round
|[[Media:Insert 3-4 in Round.dwg]]
|-
|[[Image:insert-3-4-s.png|200px]]
|Insert 3/4" Square
|[[Media:Insert 3-4 in Square.dwg]]
|-
|[[Image:insert-5-8-r.png|200px]]
|Insert 5/8" Round
|[[Media:Insert 5-8 in Round.dwg]]
|}

=== Lights ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:socket-l.png|200px]]
|44 Socket Under Playfield Long (077-5005-00)
|[[Media:Socket Under Playfield Long 077-5005-00.dwg]]
|-
|[[Image:socket-s-1.png|200px]]
|44 Socket Under Playfield Short (077-5002-00)
|[[Media:Socket Under Playfield Short 077-5002-00.dwg]]
|-
|[[Image:socket-s-2.png|200px]]
|89 Socket Under Playfield Short (077-5101-00)
|[[Media:Socket Under Playfield Short 077-5101-00.dwg]]
|}
=== Switches ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:switch.png|200px]]
|Rollover Switch and Bracket (A-12688)
|[[Media:Rollover Switch and Bracket A-12688.dwg]]
|-
|[[Image:spinner-assembly.png|200px]]
|Spinner Assembly (A-21801-2)
|[[Media:Spinner Assembly A-21801-2.dwg]]
|-
|[[Image:standup-target.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4)
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4.dwg]]
|-
|[[Image:standup-target-2.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 2
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 2).dwg]]
|-
|[[Image:standup-target-3.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 3
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 3).dwg]]
|-
|[[Image:5-target-bank.png|200px]]
|Drop Target Bank of 5
|[[Media:Drop Target Bank of 5.dwg]]
|}

== 3D templates ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:pop-bumper-template.jpg|200px]]
|Williams Pop Bumper Template
|[[File:pop-bumper-template.stl]]
|-
|[[Image:pop-bumper-template-center.jpg|200px]]
|Williams Pop Bumper Template Center Holes
|[[File:pop-bumper-template-center.stl]]
|-
|[[Image:sling-template.png|200px]]
|Williams Slingshot Template
|[[File:slingshot-template.stl]]
|-
|[[Image:sling-template-center.png|200px]]
|Williams Slingshot Template Center Holes
|[[File:sling-template-center.stl]]
|}

== Off the shelf parts ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Lamp Socket 077-5030-00.png|200px]]
|555 Lamp Socket 077-5030-00
Solidworks 2013
|[[Media:Lamp Socket 077-5030-00.zip]]
|-
|[[Image:Lamp Socket F1P-E-12-07-00.png|200px]]
|44 Socket Staple Down F1P-E-12-07-00
Solidworks 2013
|[[Media:Lamp Socket F1P-E-12-07-00.zip]]
|-
|[[Image:Lamp Socket F1P-E-12-06-00.png|200px]]
|44 Socket Under Playfield F1P-E-12-06-00
Solidworks 2013
|[[Media:Lamp Socket F1P-E-12-06-00.zip]]
|-
|[[Image:Lamp Socket Bally E-120-81.png|200px]]
|44 Socket Under Playfield Short (Bally E-120-81)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-81.zip]]
|-
|[[Image:Lamp Socket Bally E-120-99.PNG|200px]]
|44 Socket Under Playfield Flush (Bally E-120-99)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-99.zip]]
|-
|[[Image:Lamp Socket Bally E-120-162.png|200px]]
|44 Socket Under Playfield (Bally E-120-162)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-162.zip]]
|-
|[[Image:Lamp Socket Bally- Possibly E-120-84.png|200px]]
|44 Socket Under Playfield (Possibly Bally E-120-84)
Solidworks 2013
|[[Media:Lamp Socket Bally- Possibly E-120-84.zip]]
|-
|[[Image:Lamp Socket A-8798.png|200px]]
|89 Lamp Socket A-8798
Solidworks 2013
|[[Media:Lamp Socket A-8798.zip]]
|-
|[[Image:Led bulb.jpg|200px]]
|LED bulb
Solidworks 2014
|[[Media:Led bulb.SLDPRT]]
|-
|[[Image:WPC Trough.png|200px]]
|WPC Trough Assembly
Solidworks 2013
|[[Media:WPC Trough.zip]]
|-
|[[Image:SHooter Lane Kicker Assembly A-21022-1.png|200px]]
|Shooter lane Kicker Assembly A-21022-1
Solidworks 2015
|[[Media:Shooter Lane Kicker Assembly A-21022-1.zip]]
|-
|[[Image:Pop Bumper ASSY B-9414.png|200px]]
|WPC Pop Bumper Assembly
Solidworks 2013
|[[Media:WPC Pop Bumper Assy B-9414.zip]]
|-
|[[Image:3 Bank Drop Target ASSY D-7931-3S.png|200px]]
|3 bank Drop Target SYS 7
Solidworks 2013
|[[Media:3 Bank Drop Target ASSY D-7931-3S.zip]]
|-
|[[Image:3 Bank Drop Target Sys11.png|200px]]
|3 bank Drop Target SYS11
Solidworks 2013
|[[Media:3 bank Sys11 Drop Target Bank.zip]]
|-
|[[Image:5 Bank JD Drop Target Bank A-16947.png|200px]]
|5 Bank JD Drop Target Bank A-16947
Solidworks 2015
|[[Media:5 Bank JD Drop Target Bank A-16947.zip]]
|-
|[[Image:Target 03-8033.png|200px]]
|Drop Target Wedge Top
Solidworks 2013
|[[Media:Target 03-8033.SLDPRT]]
|-
|[[Image:Kicker Arm Sllingshot Assembly B-12665.png|200px]]
|Kicker Arm Slingshot Assembly B-12665
Solidworks 2013
|[[Media:Kicker Arm Sllingshot Assembly B-12665.zip]]
|-
|[[Image:Kickout Hole SYS7.png|200px]]
|Kickout Hole Sys 7
Solidworks 2013
|[[Media:Kickout Hole SYS7.zip]]
|-
|[[Image:Switch Rollover - Sys7.png|200px]]
|Rollover Lane Switch Sys7
Solidworks 2015
|[[Media:Switch Rollover - Sys7.zip]]
|-
|[[Image:Rollover Lane Switch.png|200px]]
|Rollover Lane Microswitch
Solidworks 2013
|[[Media:Rollover Lane Switch.zip]]
|-
|[[Image:Target 002 Assy.png|200px]]
|Target 002
Solidworks 2013
|[[Media:Target 002 Assy.zip]]
|-
|[[Image:Target 003 Assy.png|200px]]
|Target 003
Solidworks 2013
|[[Media:Target 003 Assy.zip]]
|-
|[[Image:Target 004 Assy.png|200px]]
|Target 004
Solidworks 2013
|[[Media:Target 004 Assy.zip]]
|-
|[[Image:Target 005 Assy.png|200px]]
|Target 005
Solidworks 2013
|[[Media:Target 005 Assy.zip]]
|-
|[[Image:Star Post PL-00172-OT.png|200px]]
|Star Post 1" - PL-00172-OT
Solidworks 2013
|[[Media:Star Post PL-00172-OT.SLDPRT]]
|-
|[[Image:Star Post 1-1'16 -03-8319-13.png|200px]]
|Star Post 1-1/16"" - 03-8319-13
Solidworks 2013
|[[Media:Star Post 1-1'16 -03-8319-13.SLDPRT]]
|-
|[[Image:Star Post 1-3'16 -03-8370-10.png|200px]]
|Star Post 1-3/16"" - 03-8370-10
Solidworks 2013
|[[Media:Star Post 1-3'16 -03-8370-10.SLDPRT]]
|-
|[[Image:Double Star Post 1-1^2 -03-8130-9.png|200px]]
|Double Star Post - 1-1/2" 03-8130-9
Solidworks 2013
|[[Media:Double Star Post 1-1^2 -03-8130-9.SLDPRT]]
|-
|[[Image:Double Star Post .png|200px]]
|Double Star Post - 1-1/16" 03-8247-13
Solidworks 2013
|[[Media:Double Star Post.SLDPRT]]
|-
|[[Image:Post Faceted 1 inch C-11561-20 .png|200px]]
|Post Faceted 1" C-11561-20
Solidworks 2013
|[[Media:Post Faceted 1 inch C-11561-20.SLDPRT]]
|-
|[[Image:Post Faceted 1-3`16 C-11562-20.png|200px]]
|Post Faceted 1-3/16" C-11562-20
Solidworks 2013
|[[Media:Post Faceted 1-3`16 C-11562-20.SLDPRT]]
|-
|[[Image:Post 1 inch Concentric Fin C-951-4 .png|200px]]
|Post 1" Concentric Fin C-951-4
Solidworks 2013
|[[Media:Post 1 inch Concentric Fin C-951-4.SLDPRT]]
|-
|[[Image:Post 1-1`8 Concentric Fin C-952-7 .png|200px]]
|Post 1-1/8" Concentric Fin C-952-7
Solidworks 2013
|[[Media:Post 1-1`8 Concentric Fin C-952-7.SLDPRT]]
|-
|[[Image:Mini Post - Plastic 550-5052-02 .png|200px]]
|Mini Post - Plastic 550-5052-02
Solidworks 2013
|[[Media:Mini Post - Plastic 550-5052-02.SLDPRT]]
|-
|[[Image:Bumper Post 8-32 Thread bottom 6-32 at Top 024056 .png|200px]]
|Bumper Post 8-32 Thread at Bottom, 6-32 at Top 02-4056
Solidworks 2013
|[[Media:Bumper Post 8-32 Thread bottom 6-32 at Top 024056.SLDPRT]]
|-
|[[Image:Mini Post 6-32 Thread 02-4195.png|200px]]
|Mini Post 6-32 Thread 02-4195
Solidworks 2013
|[[Media:Mini Post 6-32 Thread 02-4195.SLDPRT]]
|-
|[[Image:Mini Post 8-32 Thread.png|200px]]
|Mini Post 8-32 Thread
Solidworks 2013
|[[Media:Mini Post 8-32 Thread.SLDPRT]]
|-
|[[Image:Mini Post 10-32 Thread.png|200px]]
|Mini Post 10-32 Thread
Solidworks 2013
|[[Media:Mini Post 10-32 Thread.SLDPRT]]
|-
|[[Image:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.png|200px]]
|Post-Dual Ring 8-32 Thread at Bottom, 6-32 at top 02-4423
Solidworks 2013
|[[Media:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0001.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-5/8"
Solidworks 2013
|[[Media:Threaded Post Screw 0001.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0002.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-1/2"
Solidworks 2013
|[[Media:Threaded Post Screw 0002.SLDPRT]]
|-
|[[Image:Rubber Post Cap.png|200px]]
|Rubber Post Cap
Solidworks 2013
|[[Media:Rubber Post Cap.SLDPRT]]
|-
|[[Image:Insert - 1 inch RND PL-1ROT.png|200px]]
|1" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1 inch RND PL-1ROT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch RND PL-1316RBT.png|200px]]
|1-3/16" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1-3`16 inch RND PL-1316RBT.SLDPRT]]
|-
|[[Image:Insert - 5`8 inch RND PL-58ROS.png|200px]]
|5/8" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 5`8 inch RND PL-58ROS.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch RND PL-34RAS.png|200px]]
|3/4" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch RND PL-34RAS.SLDPRT]]
|-
|[[Image:Insert - 1-1`2 inch RND PL-112ROT.png|200px]]
|1-1/2" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1-1`2 inch RND PL-112ROT.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch Square PL-34SSB.png|200px]]
|3/4" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch Square PL-34SSB.SLDPRT]]
|-
|[[Image:Insert - 1inch Square PL-1SSG.png|200px]]
|1" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1inch Square PL-1SSG.SLDPRT]]
|-
|[[Image:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.png|200px]]
|3/4 x 1-1/2" Rectangular Insert - "Grid" Pattern
Solidworks 2013
|[[Media:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.SLDPRT]]
|-
|[[Image:Insert - 1-5`8 inch OVAL PI-11234--OGT.png|200px]]
|3/4 x 1-5/8" Oval Insert
Solidworks 2013
|[[Media:Insert - 1-5`8 inch OVAL PI-11234--OGT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch Tri PI-1316TOS.png|200px]]
|1-3/6"" Triangular Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`16 inch Tri PI-1316TOS.SLDPRT]]
|-
|[[Image:Insert - 1-3`4 inch Diamond PL-134DBT.png|200px]]
|1-3/4 x 3/4"" Diamond Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`4 inch Diamond PL-134DBT.SLDPRT]]
|-
|[[Image:Insert 1-1'2 inch Triangle PI-112TGT.png|200px]]
|1-1/2" Triangle Insert - "Starburst" Pattern PI-112TGT
Solidworks 2013
|[[Media:Insert 1-1'2 inch Triangle PI-112TGT.SLDPRT]]
|-
|[[Image:Insert 2 inch Arrow PI-T2RT.png|200px]]
|2" Triangle Insert - "Starburst" Pattern PI-T2RT
Solidworks 2013
|[[Media:Insert 2 inch Arrow PI-T2RT.SLDPRT]]
|-
|[[Image:Insert 2-1'2 inch Arrow 03-8359-9.png|200px]]
|2-1/2" Arrow Insert - 03-8359-9
Solidworks 2013
|[[Media:Insert 2-1'2 inch Arrow 03-8359-9.SLDPRT]]
|-
|[[Image:Lightning_insert.jpg|200px]]
|Lightning Insert - PI-3-LO
Solidworks 2014
|[[Media:Lightning_insert.SLDPRT]]
|-
|[[Image:Rollover C-901.png|200px]]
|Rollover Insert C-901
Solidworks 2013
|[[Media:Rollover C-9901.zip]]
|-
|[[Image:Lane Guide 03-8318-25.PNG|200px]]
|Lane Guide 03-8318-25
Solidworks 2013
|[[Media:Lane Guide 03-8318-25.SLDPRT]]
|-
|[[Image:Lane Guide.PNG|200px]]
|Lane Guide
Solidworks 2013
|[[Media:Lane Guide.SLDPRT]]
|-
|[[Image:Ball Gate Assembly - RT A-8096-R.PNG|200px]]
|Ball Gate Assembly - RT A-8096-R
Solidworks 2013
|[[Media:Ball Gate Assembly - RT A-8096-R.ZIP]]
|-
|[[Image:Stern-spinner-511-5113-00.jpg|200px]]
|Stern Spinner 511-5113-00
Solidworks 2014
|[[Media:Stern-511-5113-00.zip]]
|-
|[[Image:Gate Assy 0001.PNG|200px]]
|Ball Gate Assembly -
Solidworks 2013
|[[Media:Gate Assy 0001.zip]]
|-
|[[Image:Flipper Assembly WPC.png|200px]]
|Flipper Assembly WPC (coil is incorrect)
Solidworks 2013
|[[Media:Flipper Assembly WPC.zip]]
|-
|[[Image:Flipper Bat 2inch.PNG|200px]]
|Flipper Bat 2 Inch
Solidworks 2013
|[[Media:Flipper Bat 2inch.zip]]
|-
|[[Image:Flipper Bat 3inch.PNG|200px]]
|Flipper Bat 3 inch
Solidworks 2013
|[[Media:Flipper Bat 3inch.zip]]
|-
|[[Image:Opto Base MTG.png|200px]]
|Opto Base Mounting
Solidworks 2013
|[[Media:Opto Base MTG.sldprt]]
|-
|[[Image:PF Test1.PNG|200px]]
|Test PF shooter lane cut
Solidworks 2013
|[[Media:Test PF 1.sldprt]]
|-
|[[Image:Inlane_williams_plastic.jpg|200px]]
|Williams Inlane
Solidworks 2014
|[[Media:Inlane_williams_plastic.SLDPRT]]
|-
|[[Image:Inlane_de-sega-stern_plastic.jpg|200px]]
|Data East / SEGA / Stern
Solidworks 2014
|[[Media:Inlane DE-sega-stern.SLDPRT]]
|-
|[[Image:Apron_stern.jpg|200px]]
| Stern
Solidworks 2014
|[[Media:Apron stern.SLDPRT]]
|}

== Non Standard Parts ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Wireform bracket.jpg|200px]]
| 3d printable wireform bracket to be used with any 1/8" round material (ABS, steel, polyethylene tubing, etc)
Solidworks 2014
|[[Media:Wireform bracket.SLDPRT]]
|-
|[[Image:Loop_da_loop_ramp.jpg|200px]]
| 3d printable loop da loop ramp
Solidworks 2014
|[[Media:Loop_da_loop_ramp.SLDPRT]]
|-
|[[Image:Vertical loop ramp.jpg|200px]]
| 3d printable vertical loopback ramp
Solidworks 2014
|[[Media:Vertical loop ramp.SLDPRT]]
|}

File:SYS7Cab Lower 200wide.png

2017-04-13T08:25:32Z

BobLangelius:

File:Pharaoh Cabinet Lower.pdf

2017-04-13T08:16:26Z

BobLangelius:

File:SYS7 Lower PDF SNIP.jpg

2017-04-13T08:13:21Z

BobLangelius:

Files Section

2017-04-13T08:02:08Z

BobLangelius: /* Cabinet */

== Notice ==

Files located in this section are provided by Pinball Makers users and are not tested and/or confirmed to be accurate, so use them at your own risk.

If you are aware of any specific files being inaccurate or broken, please contact the administrators.

== Diagrams ==

Drawings and other diagrams with dimensions not in CAD format.

=== Cabinet ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:wpc-backbox-1.png|200px]]
|WPC Backbox (in millimeters)
|[[Media:wpc-backbox-1.png]]
|-
|[[Image:wpc-cabinet-1.png|200px]]
|WPC full cabinet cut guide for 4" x 8" plywood
|[[Media:wpc-cabinet-1.png]]
|-
|[[Image:wpc-cabinet-2.png|200px]]
|WPC Main cabinet side and back (in millimeters)
|[[Media:wpc-cabinet-2.png]]
|-
|[[Image:wpc-cabinet-3.png|200px]]
|WPC Cabinet front (in millimeters)
|[[Media:wpc-cabinet-3.png]]
|-
|[[Image:wpc-cabinet-4.png|200px]]
|WPC Cabinet front for multiple ball launchers (in millimeters)
|[[Media:wpc-cabinet-4.png]]
|-
|[[Image:SYS7Cab Upper 200wide.png|200px]]
|SYS7 Cabinet Upper (Pharaoh),Solidworks 2015
|[[Media:Pharaoh Cabinet Upper 3-6-2017.zip]]
|-
|[[Image:SYS7 Head PDF SNIP.jpg|200px]]
|SYS7 Cabinet Upper (Pharaoh), PDF
|[[Media:Pharaoh Cabinet Upper.pdf]]
|-
|[[Image:SYS7Cab Lower 200wide.png|200px]]
|SYS7 Cabinet Lower (Pharaoh),Solidworks 2015
|[[Media:Pharaoh Cabinet Lower 4-13-2017.zip]]
|-
|[[Image:SYS7 Lower PDF SNIP.jpg|200px]]
|SYS7 Cabinet Lower (Pharaoh), PDF
|[[Media:Pharaoh Cabinet Lower.pdf]]
|}

=== Playfield ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:williams-lower-playfield.png|200px]]
|WPC lower playfield dimensions (millimeter)
|[[Media:williams-lower-playfield.png]]
|-
|[[Image:williams-early-ss.jpg|200px]]
|Williams Early Solid State lower playfield
C-size for sending to print store (inches)
|[[Media:Williams_early_SS_c_size.pdf]]
|-
|[[Image:stern-lower-pf.jpg|200px]]
|Stern lower playfield
C-size for sending to print store (inches)
|[[Media:Stern_c_size.pdf]]
|}

=== Devices ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-trough-diagram.png|200px]]
|Ball Trough (6-Ball)
|[[Media:6balltrough.ai]]
|}

== Schematics ==

Files for EagleCAD or general electronic schematics.

=== Original Equipment ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:gottlieb-system-3-image.png|200px]]
|Gottlieb System 3 Driver Board
|[[Media:gottlieb-system-3.pdf]]
|-
|[[Image:wpc-sw.png|200px]]
|WPC Switch Matrix design
|[[Media:wpc-sw.pdf]]
|-
|[[Image:wpc-lamp.png|200px]]
|WPC Lamp Matrix design
|[[Media:wpc-lamp.pdf]]
|-
|[[Image:wpc-solenoid.png|200px]]
|WPC Solenoid design
|[[Media:wpc-solenoid.pdf]]
|}

== 2D CAD Drawings ==

For use in AutoCAD or DraftSight when doing playfield layout.

=== Playfields ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Williams_playfield.jpg|200px]]
|Williams Early SS playfield
|[[Media:Williams_playfield.dwg]]
|-
|[[Image:Williams_Playfield.jpg|200px]]
|Williams Early SS playfield for Sketchup
|[[Media:Williams_Blank_Playfield.skp]]
|-
|[[Image:bally-ss.jpg|200px]]
|Bally SS Blank Playfield
|[[Media:bally-blank.dwg]]
|}

=== Ball Guides ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-inlane-guide.png|200px]]
|Ball Inlane Guide
|[[Media:Ball Inlane Guide (left) - 550-5037-01.dwg]]
|-
|[[Image:ball-lane-guide-top.png|200px]]
|Ball Lane Guide Top Double Sided (03-7034) and Star Posts (03-8319) w/5-16 in rubber
|[[Media:Ball Lane Guide Top Double Sided - 03-7034 - and Star Posts - 03-8319 w 5-16 in rubber.dwg]]
|-
|[[Image:metal-post-1-7-8.png|200px]]
|Metal Post 1 7/8" (530-5005-00) with 7/16" OD Mini Post Rubber (23-6694-1)
|[[Media:Metal Post 1 7-8 in tall 530-5005-00 w 7-16 in OD Mini Post Rubber 23-6694-1.dwg]]
|-
|[[Image:metal-post-2-1-8.png|200px]]
|Metal Post 2 1/8" (530-5332-01) with Bumper Post Sleeve 1 1/16"
|[[Media:Metal Post 2 1-8 in tall 530-5332-01 w Bumper Post Sleeve 1 1-16 in.dwg]]
|-
|[[Image:plastic-post.png|200px]]
|Narrow Plastic Post (03-8365) with 3/16" rubber
|[[Media:Narrow Plastic Post 03-8365 w 3-16 in rubber.dwg]]
|-
|[[Image:spade-bolt.png|200px]]
|Spade Bolt (Offset)
|[[Media:Spade Bolt (Offset).dwg]]
|-
|[[Image:star-post.png|200px]]
|Star Post (03-8319)
|[[Media:Star Post - 03-8319.dwg]]
|-
|[[Image:shooter-lane.jpg|200px]]
|Shooter Lane Insert
|[[Media:shooter-lane.dwg]]
|}

=== Coil Assemblies ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-launcher.png|200px]]
|Ball Launcher (500-5477-01)
|[[Media:Ball Launcher 500-5477-01.dwg]]
|-
|[[Image:ball-trough.png|200px]]
|Ball Trough Assembly 4 Ball (500-6119-14) and Enter Exit Scoop (535-7329-01)
|[[Media:Ball Trough Assembly 4 Ball 500-6119-14 Enter Exit Scoop 535-7329-01.dwg]]
|-
|[[Image:flipper-left.png|200px]]
|Flipper Assembly (A-15205) w/left mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Left).dwg]]
|-
|[[Image:flipper-right.png|200px]]
|Flipper Assembly (A-15205) w/right mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Right).dwg]]
|-
|[[Image:magnet-1.png|200px]]
|Magnet Bracket (A-15257) and Magnet Coil (20-9247)
|[[Media:Magnet Bracket A-15257 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:magnet-2.png|200px]]
|Threaded Core Weld Assembly (515-6141-01) and Magnet Coil (20-9247)
|[[Media:Threaded Core Weld Assembly 515-6141-01 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:pop-bumper.png|200px]]
|Pop Bumper Assembly Williams Bally
|[[Media:Pop Bumper Assembly Williams Bally.dwg]]
|-
|[[Image:slingshot-assembly.png|200px]]
|Slingshot Assembly (500-5849-00)
|[[Media:Slingshot Assembly - 500-5849-00.dwg]]
|}

=== Inserts ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:insert-1-1-2.png|200px]]
|Insert 1 1/2" Arrow
|[[Media:Insert 1 1-2 in Arrow.dwg]]
|-
|[[Image:insert-1-1-2-r.png|200px]]
|Insert 1 1/2" Rectangle
|[[Media:Insert 1 1-2 in Rectangle.dwg]]
|-
|[[Image:insert-1-1-2-ro.png|200px]]
|Insert 1 1/2" Round
|[[Media:Insert 1 1-2 in Round.dwg]]
|-
|[[Image:insert-1-3-16-r.png|200px]]
|Insert 1 3/16" Round
|[[Media:Insert 1 3-16 in Round.dwg]]
|-
|[[Image:insert-1-3-16-t.png|200px]]
|Insert 1 3/16" Triangle
|[[Media:Insert 1 3-16 in Triangle.dwg]]
|-
|[[Image:insert-1-5-8.png|200px]]
|Insert 1 5/8" Oval
|[[Media:Insert 1 5-8 in Oval.dwg]]
|-
|[[Image:insert-1-s.png|200px]]
|Insert 1" Square
|[[Media:Insert 1 in Square.dwg]]
|-
|[[Image:insert-1-r.png|200px]]
|Insert 1" Round
|[[Media:Insert 1 in Round.dwg]]
|-
|[[Image:insert-2-a.png|200px]]
|Insert 2" Arrow
|[[Media:Insert 2 in Arrow.dwg]]
|-
|[[Image:insert-3-4-r.png|200px]]
|Insert 3/4" Round
|[[Media:Insert 3-4 in Round.dwg]]
|-
|[[Image:insert-3-4-s.png|200px]]
|Insert 3/4" Square
|[[Media:Insert 3-4 in Square.dwg]]
|-
|[[Image:insert-5-8-r.png|200px]]
|Insert 5/8" Round
|[[Media:Insert 5-8 in Round.dwg]]
|}

=== Lights ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:socket-l.png|200px]]
|44 Socket Under Playfield Long (077-5005-00)
|[[Media:Socket Under Playfield Long 077-5005-00.dwg]]
|-
|[[Image:socket-s-1.png|200px]]
|44 Socket Under Playfield Short (077-5002-00)
|[[Media:Socket Under Playfield Short 077-5002-00.dwg]]
|-
|[[Image:socket-s-2.png|200px]]
|89 Socket Under Playfield Short (077-5101-00)
|[[Media:Socket Under Playfield Short 077-5101-00.dwg]]
|}
=== Switches ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:switch.png|200px]]
|Rollover Switch and Bracket (A-12688)
|[[Media:Rollover Switch and Bracket A-12688.dwg]]
|-
|[[Image:spinner-assembly.png|200px]]
|Spinner Assembly (A-21801-2)
|[[Media:Spinner Assembly A-21801-2.dwg]]
|-
|[[Image:standup-target.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4)
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4.dwg]]
|-
|[[Image:standup-target-2.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 2
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 2).dwg]]
|-
|[[Image:standup-target-3.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 3
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 3).dwg]]
|-
|[[Image:5-target-bank.png|200px]]
|Drop Target Bank of 5
|[[Media:Drop Target Bank of 5.dwg]]
|}

== 3D templates ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:pop-bumper-template.jpg|200px]]
|Williams Pop Bumper Template
|[[File:pop-bumper-template.stl]]
|-
|[[Image:pop-bumper-template-center.jpg|200px]]
|Williams Pop Bumper Template Center Holes
|[[File:pop-bumper-template-center.stl]]
|-
|[[Image:sling-template.png|200px]]
|Williams Slingshot Template
|[[File:slingshot-template.stl]]
|-
|[[Image:sling-template-center.png|200px]]
|Williams Slingshot Template Center Holes
|[[File:sling-template-center.stl]]
|}

== Off the shelf parts ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Lamp Socket 077-5030-00.png|200px]]
|555 Lamp Socket 077-5030-00
Solidworks 2013
|[[Media:Lamp Socket 077-5030-00.zip]]
|-
|[[Image:Lamp Socket F1P-E-12-07-00.png|200px]]
|44 Socket Staple Down F1P-E-12-07-00
Solidworks 2013
|[[Media:Lamp Socket F1P-E-12-07-00.zip]]
|-
|[[Image:Lamp Socket F1P-E-12-06-00.png|200px]]
|44 Socket Under Playfield F1P-E-12-06-00
Solidworks 2013
|[[Media:Lamp Socket F1P-E-12-06-00.zip]]
|-
|[[Image:Lamp Socket Bally E-120-81.png|200px]]
|44 Socket Under Playfield Short (Bally E-120-81)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-81.zip]]
|-
|[[Image:Lamp Socket Bally E-120-99.PNG|200px]]
|44 Socket Under Playfield Flush (Bally E-120-99)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-99.zip]]
|-
|[[Image:Lamp Socket Bally E-120-162.png|200px]]
|44 Socket Under Playfield (Bally E-120-162)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-162.zip]]
|-
|[[Image:Lamp Socket Bally- Possibly E-120-84.png|200px]]
|44 Socket Under Playfield (Possibly Bally E-120-84)
Solidworks 2013
|[[Media:Lamp Socket Bally- Possibly E-120-84.zip]]
|-
|[[Image:Lamp Socket A-8798.png|200px]]
|89 Lamp Socket A-8798
Solidworks 2013
|[[Media:Lamp Socket A-8798.zip]]
|-
|[[Image:Led bulb.jpg|200px]]
|LED bulb
Solidworks 2014
|[[Media:Led bulb.SLDPRT]]
|-
|[[Image:WPC Trough.png|200px]]
|WPC Trough Assembly
Solidworks 2013
|[[Media:WPC Trough.zip]]
|-
|[[Image:SHooter Lane Kicker Assembly A-21022-1.png|200px]]
|Shooter lane Kicker Assembly A-21022-1
Solidworks 2015
|[[Media:Shooter Lane Kicker Assembly A-21022-1.zip]]
|-
|[[Image:Pop Bumper ASSY B-9414.png|200px]]
|WPC Pop Bumper Assembly
Solidworks 2013
|[[Media:WPC Pop Bumper Assy B-9414.zip]]
|-
|[[Image:3 Bank Drop Target ASSY D-7931-3S.png|200px]]
|3 bank Drop Target SYS 7
Solidworks 2013
|[[Media:3 Bank Drop Target ASSY D-7931-3S.zip]]
|-
|[[Image:3 Bank Drop Target Sys11.png|200px]]
|3 bank Drop Target SYS11 (PCB Not to Scale)
Solidworks 2013
|[[Media:3 bank Sys11 Drop Target Bank.zip]]
|-
|[[Image:5 Bank JD Drop Target Bank A-16947.png|200px]]
|5 Bank JD Drop Target Bank A-16947
Solidworks 2015
|[[Media:5 Bank JD Drop Target Bank A-16947.zip]]
|-
|[[Image:Target 03-8033.png|200px]]
|Drop Target Wedge Top
Solidworks 2013
|[[Media:Target 03-8033.SLDPRT]]
|-
|[[Image:Kicker Arm Sllingshot Assembly B-12665.png|200px]]
|Kicker Arm Slingshot Assembly B-12665
Solidworks 2013
|[[Media:Kicker Arm Sllingshot Assembly B-12665.zip]]
|-
|[[Image:Kickout Hole SYS7.png|200px]]
|Kickout Hole Sys 7
Solidworks 2013
|[[Media:Kickout Hole SYS7.zip]]
|-
|[[Image:Switch Rollover - Sys7.png|200px]]
|Rollover Lane Switch Sys7
Solidworks 2015
|[[Media:Switch Rollover - Sys7.zip]]
|-
|[[Image:Rollover Lane Switch.png|200px]]
|Rollover Lane Microswitch
Solidworks 2013
|[[Media:Rollover Lane Switch.zip]]
|-
|[[Image:Target 002 Assy.png|200px]]
|Target 002
Solidworks 2013
|[[Media:Target 002 Assy.zip]]
|-
|[[Image:Target 003 Assy.png|200px]]
|Target 003
Solidworks 2013
|[[Media:Target 003 Assy.zip]]
|-
|[[Image:Target 004 Assy.png|200px]]
|Target 004
Solidworks 2013
|[[Media:Target 004 Assy.zip]]
|-
|[[Image:Target 005 Assy.png|200px]]
|Target 005
Solidworks 2013
|[[Media:Target 005 Assy.zip]]
|-
|[[Image:Star Post PL-00172-OT.png|200px]]
|Star Post 1" - PL-00172-OT
Solidworks 2013
|[[Media:Star Post PL-00172-OT.SLDPRT]]
|-
|[[Image:Star Post 1-1'16 -03-8319-13.png|200px]]
|Star Post 1-1/16"" - 03-8319-13
Solidworks 2013
|[[Media:Star Post 1-1'16 -03-8319-13.SLDPRT]]
|-
|[[Image:Star Post 1-3'16 -03-8370-10.png|200px]]
|Star Post 1-3/16"" - 03-8370-10
Solidworks 2013
|[[Media:Star Post 1-3'16 -03-8370-10.SLDPRT]]
|-
|[[Image:Double Star Post 1-1^2 -03-8130-9.png|200px]]
|Double Star Post - 1-1/2" 03-8130-9
Solidworks 2013
|[[Media:Double Star Post 1-1^2 -03-8130-9.SLDPRT]]
|-
|[[Image:Double Star Post .png|200px]]
|Double Star Post - 1-1/16" 03-8247-13
Solidworks 2013
|[[Media:Double Star Post.SLDPRT]]
|-
|[[Image:Post Faceted 1 inch C-11561-20 .png|200px]]
|Post Faceted 1" C-11561-20
Solidworks 2013
|[[Media:Post Faceted 1 inch C-11561-20.SLDPRT]]
|-
|[[Image:Post Faceted 1-3`16 C-11562-20.png|200px]]
|Post Faceted 1-3/16" C-11562-20
Solidworks 2013
|[[Media:Post Faceted 1-3`16 C-11562-20.SLDPRT]]
|-
|[[Image:Post 1 inch Concentric Fin C-951-4 .png|200px]]
|Post 1" Concentric Fin C-951-4
Solidworks 2013
|[[Media:Post 1 inch Concentric Fin C-951-4.SLDPRT]]
|-
|[[Image:Post 1-1`8 Concentric Fin C-952-7 .png|200px]]
|Post 1-1/8" Concentric Fin C-952-7
Solidworks 2013
|[[Media:Post 1-1`8 Concentric Fin C-952-7.SLDPRT]]
|-
|[[Image:Mini Post - Plastic 550-5052-02 .png|200px]]
|Mini Post - Plastic 550-5052-02
Solidworks 2013
|[[Media:Mini Post - Plastic 550-5052-02.SLDPRT]]
|-
|[[Image:Bumper Post 8-32 Thread bottom 6-32 at Top 024056 .png|200px]]
|Bumper Post 8-32 Thread at Bottom, 6-32 at Top 02-4056
Solidworks 2013
|[[Media:Bumper Post 8-32 Thread bottom 6-32 at Top 024056.SLDPRT]]
|-
|[[Image:Mini Post 6-32 Thread 02-4195.png|200px]]
|Mini Post 6-32 Thread 02-4195
Solidworks 2013
|[[Media:Mini Post 6-32 Thread 02-4195.SLDPRT]]
|-
|[[Image:Mini Post 8-32 Thread.png|200px]]
|Mini Post 8-32 Thread
Solidworks 2013
|[[Media:Mini Post 8-32 Thread.SLDPRT]]
|-
|[[Image:Mini Post 10-32 Thread.png|200px]]
|Mini Post 10-32 Thread
Solidworks 2013
|[[Media:Mini Post 10-32 Thread.SLDPRT]]
|-
|[[Image:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.png|200px]]
|Post-Dual Ring 8-32 Thread at Bottom, 6-32 at top 02-4423
Solidworks 2013
|[[Media:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0001.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-5/8"
Solidworks 2013
|[[Media:Threaded Post Screw 0001.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0002.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-1/2"
Solidworks 2013
|[[Media:Threaded Post Screw 0002.SLDPRT]]
|-
|[[Image:Rubber Post Cap.png|200px]]
|Rubber Post Cap
Solidworks 2013
|[[Media:Rubber Post Cap.SLDPRT]]
|-
|[[Image:Insert - 1 inch RND PL-1ROT.png|200px]]
|1" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1 inch RND PL-1ROT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch RND PL-1316RBT.png|200px]]
|1-3/16" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1-3`16 inch RND PL-1316RBT.SLDPRT]]
|-
|[[Image:Insert - 5`8 inch RND PL-58ROS.png|200px]]
|5/8" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 5`8 inch RND PL-58ROS.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch RND PL-34RAS.png|200px]]
|3/4" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch RND PL-34RAS.SLDPRT]]
|-
|[[Image:Insert - 1-1`2 inch RND PL-112ROT.png|200px]]
|1-1/2" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1-1`2 inch RND PL-112ROT.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch Square PL-34SSB.png|200px]]
|3/4" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch Square PL-34SSB.SLDPRT]]
|-
|[[Image:Insert - 1inch Square PL-1SSG.png|200px]]
|1" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1inch Square PL-1SSG.SLDPRT]]
|-
|[[Image:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.png|200px]]
|3/4 x 1-1/2" Rectangular Insert - "Grid" Pattern
Solidworks 2013
|[[Media:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.SLDPRT]]
|-
|[[Image:Insert - 1-5`8 inch OVAL PI-11234--OGT.png|200px]]
|3/4 x 1-5/8" Oval Insert
Solidworks 2013
|[[Media:Insert - 1-5`8 inch OVAL PI-11234--OGT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch Tri PI-1316TOS.png|200px]]
|1-3/6"" Triangular Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`16 inch Tri PI-1316TOS.SLDPRT]]
|-
|[[Image:Insert - 1-3`4 inch Diamond PL-134DBT.png|200px]]
|1-3/4 x 3/4"" Diamond Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`4 inch Diamond PL-134DBT.SLDPRT]]
|-
|[[Image:Insert 1-1'2 inch Triangle PI-112TGT.png|200px]]
|1-1/2" Triangle Insert - "Starburst" Pattern PI-112TGT
Solidworks 2013
|[[Media:Insert 1-1'2 inch Triangle PI-112TGT.SLDPRT]]
|-
|[[Image:Insert 2 inch Arrow PI-T2RT.png|200px]]
|2" Triangle Insert - "Starburst" Pattern PI-T2RT
Solidworks 2013
|[[Media:Insert 2 inch Arrow PI-T2RT.SLDPRT]]
|-
|[[Image:Insert 2-1'2 inch Arrow 03-8359-9.png|200px]]
|2-1/2" Arrow Insert - 03-8359-9
Solidworks 2013
|[[Media:Insert 2-1'2 inch Arrow 03-8359-9.SLDPRT]]
|-
|[[Image:Lightning_insert.jpg|200px]]
|Lightning Insert - PI-3-LO
Solidworks 2014
|[[Media:Lightning_insert.SLDPRT]]
|-
|[[Image:Rollover C-901.png|200px]]
|Rollover Insert C-901
Solidworks 2013
|[[Media:Rollover C-9901.zip]]
|-
|[[Image:Lane Guide 03-8318-25.PNG|200px]]
|Lane Guide 03-8318-25
Solidworks 2013
|[[Media:Lane Guide 03-8318-25.SLDPRT]]
|-
|[[Image:Lane Guide.PNG|200px]]
|Lane Guide
Solidworks 2013
|[[Media:Lane Guide.SLDPRT]]
|-
|[[Image:Ball Gate Assembly - RT A-8096-R.PNG|200px]]
|Ball Gate Assembly - RT A-8096-R
Solidworks 2013
|[[Media:Ball Gate Assembly - RT A-8096-R.ZIP]]
|-
|[[Image:Stern-spinner-511-5113-00.jpg|200px]]
|Stern Spinner 511-5113-00
Solidworks 2014
|[[Media:Stern-511-5113-00.zip]]
|-
|[[Image:Gate Assy 0001.PNG|200px]]
|Ball Gate Assembly -
Solidworks 2013
|[[Media:Gate Assy 0001.zip]]
|-
|[[Image:Flipper Assembly WPC.png|200px]]
|Flipper Assembly WPC (coil is incorrect)
Solidworks 2013
|[[Media:Flipper Assembly WPC.zip]]
|-
|[[Image:Flipper Bat 2inch.PNG|200px]]
|Flipper Bat 2 Inch
Solidworks 2013
|[[Media:Flipper Bat 2inch.zip]]
|-
|[[Image:Flipper Bat 3inch.PNG|200px]]
|Flipper Bat 3 inch
Solidworks 2013
|[[Media:Flipper Bat 3inch.zip]]
|-
|[[Image:Opto Base MTG.png|200px]]
|Opto Base Mounting
Solidworks 2013
|[[Media:Opto Base MTG.sldprt]]
|-
|[[Image:PF Test1.PNG|200px]]
|Test PF shooter lane cut
Solidworks 2013
|[[Media:Test PF 1.sldprt]]
|-
|[[Image:Inlane_williams_plastic.jpg|200px]]
|Williams Inlane
Solidworks 2014
|[[Media:Inlane_williams_plastic.SLDPRT]]
|-
|[[Image:Inlane_de-sega-stern_plastic.jpg|200px]]
|Data East / SEGA / Stern
Solidworks 2014
|[[Media:Inlane DE-sega-stern.SLDPRT]]
|-
|[[Image:Apron_stern.jpg|200px]]
| Stern
Solidworks 2014
|[[Media:Apron stern.SLDPRT]]
|}

== Non Standard Parts ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Wireform bracket.jpg|200px]]
| 3d printable wireform bracket to be used with any 1/8" round material (ABS, steel, polyethylene tubing, etc)
Solidworks 2014
|[[Media:Wireform bracket.SLDPRT]]
|-
|[[Image:Loop_da_loop_ramp.jpg|200px]]
| 3d printable loop da loop ramp
Solidworks 2014
|[[Media:Loop_da_loop_ramp.SLDPRT]]
|-
|[[Image:Vertical loop ramp.jpg|200px]]
| 3d printable vertical loopback ramp
Solidworks 2014
|[[Media:Vertical loop ramp.SLDPRT]]
|}

File:Pharaoh Cabinet Upper.pdf

2017-03-07T21:19:30Z

BobLangelius:

File:SYS7 Head PDF SNIP.jpg

2017-03-07T21:18:48Z

BobLangelius:

Files Section

Files Section

2015-06-08T09:20:07Z

BobLangelius: /* 3D Templates */

== Diagrams ==

Drawings and other diagrams with dimensions not in CAD format.

=== Cabinet ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:wpc-backbox-1.png|200px]]
|WPC Backbox (in millimeters)
|[[Media:wpc-backbox-1.png]]
|-
|[[Image:wpc-cabinet-1.png|200px]]
|WPC full cabinet cut guide for 4" x 8" plywood
|[[Media:wpc-cabinet-1.png]]
|-
|[[Image:wpc-cabinet-2.png|200px]]
|WPC Main cabinet side and back (in millimeters)
|[[Media:wpc-cabinet-2.png]]
|-
|[[Image:wpc-cabinet-3.png|200px]]
|WPC Cabinet front (in millimeters)
|[[Media:wpc-cabinet-3.png]]
|-
|[[Image:wpc-cabinet-4.png|200px]]
|WPC Cabinet front for multiple ball launchers (in millimeters)
|[[Media:wpc-cabinet-4.png]]
|}

=== Playfield ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:williams-lower-playfield.png|200px]]
|WPC lower playfield dimensions (millimeter)
|[[Media:williams-lower-playfield.png]]
|-
|[[Image:williams-early-ss.jpg|200px]]
|Williams Early Solid State lower playfield
C-size for sending to print store (inches)
|[[Media:Williams_early_SS_c_size.pdf]]
|-
|[[Image:stern-lower-pf.jpg|200px]]
|Stern lower playfield
C-size for sending to print store (inches)
|[[Media:Stern_c_size.pdf]]
|}

=== Devices ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-trough-diagram.png|200px]]
|Ball Trough (6-Ball)
|[[Media:6balltrough.ai]]
|}

== Schematics ==

Files for EagleCAD or general electronic schematics.

=== Original Equipment ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:gottlieb-system-3-image.png|200px]]
|Gottlieb System 3 Driver Board
|[[Media:gottlieb-system-3.pdf]]
|-
|[[Image:wpc-sw.png|200px]]
|WPC Switch Matrix design
|[[Media:wpc-sw.pdf]]
|-
|[[Image:wpc-lamp.png|200px]]
|WPC Lamp Matrix design
|[[Media:wpc-lamp.pdf]]
|-
|[[Image:wpc-solenoid.png|200px]]
|WPC Solenoid design
|[[Media:wpc-solenoid.pdf]]
|}

== CAD Drawings ==

For use in AutoCAD or DraftSight when doing playfield layout.

=== Playfields ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Stern_playfield.jpg|200px]]
|Stern Playfield
|[[Media:Stern_playfield.dwg]]
|-
|[[Image:Stern_playfield_3d.jpg|200px]]
|Stern Playfield
|[[Media:Stern_blank_playfield.SLDPRT]]
|-
|[[Image:Stern_Playfield_Sketchup.jpg|200px]]
|Stern Playfield for Sketchup
|[[Media:Stern_Playfield.skp]]
|-
|[[Image:Williams_playfield.jpg|200px]]
|Williams Early SS playfield
|[[Media:Williams_playfield.dwg]]
|-
|[[Image:Williams_Playfield.jpg|200px]]
|Williams Early SS playfield for Sketchup
|[[Media:Williams_Blank_Playfield.skp]]
|-
|[[Image:bally-ss.jpg|200px]]
|Bally SS Blank Playfield
|[[Media:bally-blank.dwg]]
|}

=== Ball Guides ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-inlane-guide.png|200px]]
|Ball Inlane Guide
|[[Media:Ball Inlane Guide (left) - 550-5037-01.dwg]]
|-
|[[Image:ball-lane-guide-top.png|200px]]
|Ball Lane Guide Top Double Sided (03-7034) and Star Posts (03-8319) w/5-16 in rubber
|[[Media:Ball Lane Guide Top Double Sided - 03-7034 - and Star Posts - 03-8319 w 5-16 in rubber.dwg]]
|-
|[[Image:metal-post-1-7-8.png|200px]]
|Metal Post 1 7/8" (530-5005-00) with 7/16" OD Mini Post Rubber (23-6694-1)
|[[Media:Metal Post 1 7-8 in tall 530-5005-00 w 7-16 in OD Mini Post Rubber 23-6694-1.dwg]]
|-
|[[Image:metal-post-2-1-8.png|200px]]
|Metal Post 2 1/8" (530-5332-01) with Bumper Post Sleeve 1 1/16"
|[[Media:Metal Post 2 1-8 in tall 530-5332-01 w Bumper Post Sleeve 1 1-16 in.dwg]]
|-
|[[Image:plastic-post.png|200px]]
|Narrow Plastic Post (03-8365) with 3/16" rubber
|[[Media:Narrow Plastic Post 03-8365 w 3-16 in rubber.dwg]]
|-
|[[Image:spade-bolt.png|200px]]
|Spade Bolt (Offset)
|[[Media:Spade Bolt (Offset).dwg]]
|-
|[[Image:star-post.png|200px]]
|Star Post (03-8319)
|[[Media:Star Post - 03-8319.dwg]]
|-
|[[Image:shooter-lane.jpg|200px]]
|Shooter Lane Insert
|[[Media:shooter-lane.dwg]]
|}

=== Coil Assemblies ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-launcher.png|200px]]
|Ball Launcher (500-5477-01)
|[[Media:Ball Launcher 500-5477-01.dwg]]
|-
|[[Image:ball-trough.png|200px]]
|Ball Trough Assembly 4 Ball (500-6119-14) and Enter Exit Scoop (535-7329-01)
|[[Media:Ball Trough Assembly 4 Ball 500-6119-14 Enter Exit Scoop 535-7329-01.dwg]]
|-
|[[Image:flipper-left.png|200px]]
|Flipper Assembly (A-15205) w/left mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Left).dwg]]
|-
|[[Image:flipper-right.png|200px]]
|Flipper Assembly (A-15205) w/right mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Right).dwg]]
|-
|[[Image:magnet-1.png|200px]]
|Magnet Bracket (A-15257) and Magnet Coil (20-9247)
|[[Media:Magnet Bracket A-15257 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:magnet-2.png|200px]]
|Threaded Core Weld Assembly (515-6141-01) and Magnet Coil (20-9247)
|[[Media:Threaded Core Weld Assembly 515-6141-01 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:pop-bumper.png|200px]]
|Pop Bumper Assembly Williams Bally
|[[Media:Pop Bumper Assembly Williams Bally.dwg]]
|-
|[[Image:slingshot-assembly.png|200px]]
|Slingshot Assembly (500-5849-00)
|[[Media:Slingshot Assembly - 500-5849-00.dwg]]
|}

=== Inserts ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:insert-1-1-2.png|200px]]
|Insert 1 1/2" Arrow
|[[Media:Insert 1 1-2 in Arrow.dwg]]
|-
|[[Image:insert-1-1-2-r.png|200px]]
|Insert 1 1/2" Rectangle
|[[Media:Insert 1 1-2 in Rectangle.dwg]]
|-
|[[Image:insert-1-1-2-ro.png|200px]]
|Insert 1 1/2" Round
|[[Media:Insert 1 1-2 in Round.dwg]]
|-
|[[Image:insert-1-3-16-r.png|200px]]
|Insert 1 3/16" Round
|[[Media:Insert 1 3-16 in Round.dwg]]
|-
|[[Image:insert-1-3-16-t.png|200px]]
|Insert 1 3/16" Triangle
|[[Media:Insert 1 3-16 in Triangle.dwg]]
|-
|[[Image:insert-1-5-8.png|200px]]
|Insert 1 5/8" Oval
|[[Media:Insert 1 5-8 in Oval.dwg]]
|-
|[[Image:insert-1-s.png|200px]]
|Insert 1" Square
|[[Media:Insert 1 in Square.dwg]]
|-
|[[Image:insert-1-r.png|200px]]
|Insert 1" Round
|[[Media:Insert 1 in Round.dwg]]
|-
|[[Image:insert-2-a.png|200px]]
|Insert 2" Arrow
|[[Media:Insert 2 in Arrow.dwg]]
|-
|[[Image:insert-3-4-r.png|200px]]
|Insert 3/4" Round
|[[Media:Insert 3-4 in Round.dwg]]
|-
|[[Image:insert-3-4-s.png|200px]]
|Insert 3/4" Square
|[[Media:Insert 3-4 in Square.dwg]]
|-
|[[Image:insert-5-8-r.png|200px]]
|Insert 5/8" Round
|[[Media:Insert 5-8 in Round.dwg]]
|}

=== Lights ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:socket-l.png|200px]]
|44 Socket Under Playfield Long (077-5005-00)
|[[Media:Socket Under Playfield Long 077-5005-00.dwg]]
|-
|[[Image:socket-s-1.png|200px]]
|44 Socket Under Playfield Short (077-5002-00)
|[[Media:Socket Under Playfield Short 077-5002-00.dwg]]
|-
|[[Image:socket-s-2.png|200px]]
|89 Socket Under Playfield Short (077-5101-00)
|[[Media:Socket Under Playfield Short 077-5101-00.dwg]]
|}
=== Switches ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:switch.png|200px]]
|Rollover Switch and Bracket (A-12688)
|[[Media:Rollover Switch and Bracket A-12688.dwg]]
|-
|[[Image:spinner-assembly.png|200px]]
|Spinner Assembly (A-21801-2)
|[[Media:Spinner Assembly A-21801-2.dwg]]
|-
|[[Image:standup-target.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4)
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4.dwg]]
|-
|[[Image:standup-target-2.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 2
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 2).dwg]]
|-
|[[Image:standup-target-3.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 3
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 3).dwg]]
|-
|[[Image:5-target-bank.png|200px]]
|Drop Target Bank of 5
|[[Media:Drop Target Bank of 5.dwg]]
|}

== 3D Templates ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:pop-bumper-template.jpg|200px]]
|Williams Pop Bumper Template
|[[File:pop-bumper-template.stl]]
|-
|[[Image:pop-bumper-template-center.jpg|200px]]
|Williams Pop Bumper Template Center Holes
|[[File:pop-bumper-template-center.stl]]
|-
|[[Image:sling-template.png|200px]]
|Williams Slingshot Template
|[[File:slingshot-template.stl]]
|-
|[[Image:sling-template-center.png|200px]]
|Williams Slingshot Template Center Holes
|[[File:sling-template-center.stl]]
|-
|[[Image:Lamp Socket Bally E-120-81.png|200px]]
|44 Socket Under Playfield Short (Bally E-120-81)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-81.zip]]
|-
|[[Image:Lamp Socket Bally E-120-99.PNG|200px]]
|44 Socket Under Playfield Flush (Bally E-120-99)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-99.zip]]
|-
|[[Image:Lamp Socket Bally E-120-162.png|200px]]
|44 Socket Under Playfield (Bally E-120-162)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-162.zip]]
|-
|[[Image:Lamp Socket Bally- Possibly E-120-84.png|200px]]
|44 Socket Under Playfield (Possibly Bally E-120-84)
Solidworks 2013
|[[Media:Lamp Socket Bally- Possibly E-120-84.zip]]
|-
|[[Image:WPC Trough.png|200px]]
|WPC Trough Assembly
Solidworks 2013
|[[Media:WPC Trough.zip]]
|-
|[[Image:Pop Bumper ASSY B-9414.png|200px]]
|WPC Pop Bumper Assembly
Solidworks 2013
|[[Media:WPC Pop Bumper Assy B-9414.zip]]
|-
|[[Image:3 Bank Drop Target ASSY D-7931-3S.png|200px]]
|3 bank Drop Target SYS 7
Solidworks 2013
|[[Media:3 Bank Drop Target ASSY D-7931-3S.zip]]
|-
|[[Image:3 Bank Drop Target Sys11.png|200px]]
|3 bank Drop Target SYS11 (PCB Not to Scale)
Solidworks 2013
|[[Media:3 bank Sys11 Drop Target Bank.zip]]
|-
|[[Image:Target 03-8033.png|200px]]
|Drop Target Wedge Top
Solidworks 2013
|[[Media:Target 03-8033.SLDPRT]]
|-
|[[Image:Kicker Arm Sllingshot Assembly B-12665.png|200px]]
|Kicker Arm Slingshot Assembly B-12665
Solidworks 2013
|[[Media:Kicker Arm Sllingshot Assembly B-12665.zip]]
|-
|[[Image:Kickout Hole SYS7.png|200px]]
|Kickout Hole Sys 7
Solidworks 2013
|[[Media:Kickout Hole SYS7.zip]]
|-
|[[Image:Rollover Lane Switch.png|200px]]
|Rollover Lane Microswitch
Solidworks 2013
|[[Media:Rollover Lane Switch.zip]]
|-
|[[Image:Target 002 Assy.png|200px]]
|Target 002
Solidworks 2013
|[[Media:Target 002 Assy.zip]]
|-
|[[Image:Target 003 Assy.png|200px]]
|Target 003
Solidworks 2013
|[[Media:Target 003 Assy.zip]]
|-
|[[Image:Target 004 Assy.png|200px]]
|Target 004
Solidworks 2013
|[[Media:Target 004 Assy.zip]]
|-
|[[Image:Target 005 Assy.png|200px]]
|Target 005
Solidworks 2013
|[[Media:Target 005 Assy.zip]]
|-
|[[Image:Star Post PL-00172-OT.png|200px]]
|Star Post 1" - PL-00172-OT
Solidworks 2013
|[[Media:Star Post PL-00172-OT.SLDPRT]]
|-
|[[Image:Star Post 1-1'16 -03-8319-13.png|200px]]
|Star Post 1-1/16"" - 03-8319-13
Solidworks 2013
|[[Media:Star Post 1-1'16 -03-8319-13.SLDPRT]]
|-
|[[Image:Star Post 1-3'16 -03-8370-10.png|200px]]
|Star Post 1-3/16"" - 03-8370-10
Solidworks 2013
|[[Media:Star Post 1-3'16 -03-8370-10.SLDPRT]]
|-
|[[Image:Double Star Post 1-1^2 -03-8130-9.png|200px]]
|Double Star Post - 1-1/2" 03-8130-9
Solidworks 2013
|[[Media:Double Star Post 1-1^2 -03-8130-9.SLDPRT]]
|-
|[[Image:Double Star Post .png|200px]]
|Double Star Post - 1-1/16" 03-8247-13
Solidworks 2013
|[[Media:Double Star Post.SLDPRT]]
|-
|[[Image:Post Faceted 1 inch C-11561-20 .png|200px]]
|Post Faceted 1" C-11561-20
Solidworks 2013
|[[Media:Post Faceted 1 inch C-11561-20.SLDPRT]]
|-
|[[Image:Post Faceted 1-3`16 C-11562-20.png|200px]]
|Post Faceted 1-3/16" C-11562-20
Solidworks 2013
|[[Media:Post Faceted 1-3`16 C-11562-20.SLDPRT]]
|-
|[[Image:Post 1 inch Concentric Fin C-951-4 .png|200px]]
|Post 1" Concentric Fin C-951-4
Solidworks 2013
|[[Media:Post 1 inch Concentric Fin C-951-4.SLDPRT]]
|-
|[[Image:Post 1-1`8 Concentric Fin C-952-7 .png|200px]]
|Post 1-1/8" Concentric Fin C-952-7
Solidworks 2013
|[[Media:Post 1-1`8 Concentric Fin C-952-7.SLDPRT]]
|-
|[[Image:Mini Post - Plastic 550-5052-02 .png|200px]]
|Mini Post - Plastic 550-5052-02
Solidworks 2013
|[[Media:Mini Post - Plastic 550-5052-02.SLDPRT]]
|-
|[[Image:Bumper Post 8-32 Thread bottom 6-32 at Top 024056 .png|200px]]
|Bumper Post 8-32 Thread at Bottom, 6-32 at Top 02-4056
Solidworks 2013
|[[Media:Bumper Post 8-32 Thread bottom 6-32 at Top 024056.SLDPRT]]
|-
|[[Image:Mini Post 6-32 Thread 02-4195.png|200px]]
|Mini Post 6-32 Thread 02-4195
Solidworks 2013
|[[Media:Mini Post 6-32 Thread 02-4195.SLDPRT]]
|-
|[[Image:Mini Post 8-32 Thread.png|200px]]
|Mini Post 8-32 Thread
Solidworks 2013
|[[Media:Mini Post 8-32 Thread.SLDPRT]]
|-
|[[Image:Mini Post 10-32 Thread.png|200px]]
|Mini Post 10-32 Thread
Solidworks 2013
|[[Media:Mini Post 10-32 Thread.SLDPRT]]
|-
|[[Image:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.png|200px]]
|Post-Dual Ring 8-32 Thread at Bottom, 6-32 at top 02-4423
Solidworks 2013
|[[Media:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0001.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-5/8"
Solidworks 2013
|[[Media:Threaded Post Screw 0001.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0002.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-1/2"
Solidworks 2013
|[[Media:Threaded Post Screw 0002.SLDPRT]]
|-
|[[Image:Rubber Post Cap.png|200px]]
|Rubber Post Cap
Solidworks 2013
|[[Media:Rubber Post Cap.SLDPRT]]
|-
|[[Image:Insert - 1 inch RND PL-1ROT.png|200px]]
|1" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1 inch RND PL-1ROT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch RND PL-1316RBT.png|200px]]
|1-3/16" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1-3`16 inch RND PL-1316RBT.SLDPRT]]
|-
|[[Image:Insert - 5`8 inch RND PL-58ROS.png|200px]]
|5/8" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 5`8 inch RND PL-58ROS.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch RND PL-34RAS.png|200px]]
|3/4" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch RND PL-34RAS.SLDPRT]]
|-
|[[Image:Insert - 1-1`2 inch RND PL-112ROT.png|200px]]
|1-1/2" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1-1`2 inch RND PL-112ROT.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch Square PL-34SSB.png|200px]]
|3/4" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch Square PL-34SSB.SLDPRT]]
|-
|[[Image:Insert - 1inch Square PL-1SSG.png|200px]]
|1" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1inch Square PL-1SSG.SLDPRT]]
|-
|[[Image:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.png|200px]]
|3/4 x 1-1/2" Rectangular Insert - "Grid" Pattern
Solidworks 2013
|[[Media:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.SLDPRT]]
|-
|[[Image:Insert - 1-5`8 inch OVAL PI-11234--OGT.png|200px]]
|3/4 x 1-5/8" Oval Insert
Solidworks 2013
|[[Media:Insert - 1-5`8 inch OVAL PI-11234--OGT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch Tri PI-1316TOS.png|200px]]
|1-3/6"" Triangular Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`16 inch Tri PI-1316TOS.SLDPRT]]
|-
|[[Image:Insert - 1-3`4 inch Diamond PL-134DBT.png|200px]]
|1-3/4 x 3/4"" Diamond Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`4 inch Diamond PL-134DBT.SLDPRT]]
|-
|[[Image:Rollover C-901.png|200px]]
|Rollover Insert C-901
Solidworks 2013
|[[Media:Rollover C-9901.zip]]
|-
|[[Image:Lane Guide 03-8318-25.PNG|200px]]
|Lane Guide 03-8318-25
Solidworks 2013
|[[Media:Lane Guide 03-8318-25.SLDPRT]]
|-
|[[Image:Lane Guide.PNG|200px]]
|Lane Guide
Solidworks 2013
|[[Media:Lane Guide.SLDPRT]]
|-
|[[Image:Ball Gate Assembly - RT A-8096-R.PNG|200px]]
|Ball Gate Assembly - RT A-8096-R
Solidworks 2013
|[[Media:Ball Gate Assembly - RT A-8096-R.ZIP]]
|-
|[[Image:Gate Assy 0001.PNG|200px]]
|Ball Gate Assembly -
Solidworks 2013
test
test
|[[Media:Gate Assy 0001.ZIP]]
|-
|[[Image:Flipper Assembly WPC.png|200px]]
|Flipper Assembly WPC (coil is incorrect)
Solidworks 2013
|[[Media:Flipper Assembly WPC.zip]]
|-
|[[Image:Flipper Bat 2inch.PNG|200px]]
|Flipper Bat 2 Inch
Solidworks 2013
|[[Media:Flipper Bat 2inch.zip]]
|-
|[[Image:Flipper Bat 3inch.PNG|200px]]
|Gate Assembly
Solidworks 2013
|[[Media:Gate Assy 0001.zip]]
|-
|[[Image:Opto Base MTG.png|200px]]
|Opto Base Mounting
Solidworks 2013
|[[Media:Opto Base MTG.sldprt]]
|-
|[[Image:PF Test1.PNG|200px]]
|Test PF shooter lane cut
Solidworks 2013
|[[Media:Test PF 1.sldprt]]
|}

= Business Plan =

Documents outlining what it takes to move a pinball project from a hobby to a business

Files Section

2015-06-08T09:17:28Z

BobLangelius: /* 3D Templates */

== Diagrams ==

Drawings and other diagrams with dimensions not in CAD format.

=== Cabinet ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:wpc-backbox-1.png|200px]]
|WPC Backbox (in millimeters)
|[[Media:wpc-backbox-1.png]]
|-
|[[Image:wpc-cabinet-1.png|200px]]
|WPC full cabinet cut guide for 4" x 8" plywood
|[[Media:wpc-cabinet-1.png]]
|-
|[[Image:wpc-cabinet-2.png|200px]]
|WPC Main cabinet side and back (in millimeters)
|[[Media:wpc-cabinet-2.png]]
|-
|[[Image:wpc-cabinet-3.png|200px]]
|WPC Cabinet front (in millimeters)
|[[Media:wpc-cabinet-3.png]]
|-
|[[Image:wpc-cabinet-4.png|200px]]
|WPC Cabinet front for multiple ball launchers (in millimeters)
|[[Media:wpc-cabinet-4.png]]
|}

=== Playfield ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:williams-lower-playfield.png|200px]]
|WPC lower playfield dimensions (millimeter)
|[[Media:williams-lower-playfield.png]]
|-
|[[Image:williams-early-ss.jpg|200px]]
|Williams Early Solid State lower playfield
C-size for sending to print store (inches)
|[[Media:Williams_early_SS_c_size.pdf]]
|-
|[[Image:stern-lower-pf.jpg|200px]]
|Stern lower playfield
C-size for sending to print store (inches)
|[[Media:Stern_c_size.pdf]]
|}

=== Devices ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-trough-diagram.png|200px]]
|Ball Trough (6-Ball)
|[[Media:6balltrough.ai]]
|}

== Schematics ==

Files for EagleCAD or general electronic schematics.

=== Original Equipment ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:gottlieb-system-3-image.png|200px]]
|Gottlieb System 3 Driver Board
|[[Media:gottlieb-system-3.pdf]]
|-
|[[Image:wpc-sw.png|200px]]
|WPC Switch Matrix design
|[[Media:wpc-sw.pdf]]
|-
|[[Image:wpc-lamp.png|200px]]
|WPC Lamp Matrix design
|[[Media:wpc-lamp.pdf]]
|-
|[[Image:wpc-solenoid.png|200px]]
|WPC Solenoid design
|[[Media:wpc-solenoid.pdf]]
|}

== CAD Drawings ==

For use in AutoCAD or DraftSight when doing playfield layout.

=== Playfields ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Stern_playfield.jpg|200px]]
|Stern Playfield
|[[Media:Stern_playfield.dwg]]
|-
|[[Image:Stern_playfield_3d.jpg|200px]]
|Stern Playfield
|[[Media:Stern_blank_playfield.SLDPRT]]
|-
|[[Image:Stern_Playfield_Sketchup.jpg|200px]]
|Stern Playfield for Sketchup
|[[Media:Stern_Playfield.skp]]
|-
|[[Image:Williams_playfield.jpg|200px]]
|Williams Early SS playfield
|[[Media:Williams_playfield.dwg]]
|-
|[[Image:Williams_Playfield.jpg|200px]]
|Williams Early SS playfield for Sketchup
|[[Media:Williams_Blank_Playfield.skp]]
|-
|[[Image:bally-ss.jpg|200px]]
|Bally SS Blank Playfield
|[[Media:bally-blank.dwg]]
|}

=== Ball Guides ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-inlane-guide.png|200px]]
|Ball Inlane Guide
|[[Media:Ball Inlane Guide (left) - 550-5037-01.dwg]]
|-
|[[Image:ball-lane-guide-top.png|200px]]
|Ball Lane Guide Top Double Sided (03-7034) and Star Posts (03-8319) w/5-16 in rubber
|[[Media:Ball Lane Guide Top Double Sided - 03-7034 - and Star Posts - 03-8319 w 5-16 in rubber.dwg]]
|-
|[[Image:metal-post-1-7-8.png|200px]]
|Metal Post 1 7/8" (530-5005-00) with 7/16" OD Mini Post Rubber (23-6694-1)
|[[Media:Metal Post 1 7-8 in tall 530-5005-00 w 7-16 in OD Mini Post Rubber 23-6694-1.dwg]]
|-
|[[Image:metal-post-2-1-8.png|200px]]
|Metal Post 2 1/8" (530-5332-01) with Bumper Post Sleeve 1 1/16"
|[[Media:Metal Post 2 1-8 in tall 530-5332-01 w Bumper Post Sleeve 1 1-16 in.dwg]]
|-
|[[Image:plastic-post.png|200px]]
|Narrow Plastic Post (03-8365) with 3/16" rubber
|[[Media:Narrow Plastic Post 03-8365 w 3-16 in rubber.dwg]]
|-
|[[Image:spade-bolt.png|200px]]
|Spade Bolt (Offset)
|[[Media:Spade Bolt (Offset).dwg]]
|-
|[[Image:star-post.png|200px]]
|Star Post (03-8319)
|[[Media:Star Post - 03-8319.dwg]]
|-
|[[Image:shooter-lane.jpg|200px]]
|Shooter Lane Insert
|[[Media:shooter-lane.dwg]]
|}

=== Coil Assemblies ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-launcher.png|200px]]
|Ball Launcher (500-5477-01)
|[[Media:Ball Launcher 500-5477-01.dwg]]
|-
|[[Image:ball-trough.png|200px]]
|Ball Trough Assembly 4 Ball (500-6119-14) and Enter Exit Scoop (535-7329-01)
|[[Media:Ball Trough Assembly 4 Ball 500-6119-14 Enter Exit Scoop 535-7329-01.dwg]]
|-
|[[Image:flipper-left.png|200px]]
|Flipper Assembly (A-15205) w/left mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Left).dwg]]
|-
|[[Image:flipper-right.png|200px]]
|Flipper Assembly (A-15205) w/right mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Right).dwg]]
|-
|[[Image:magnet-1.png|200px]]
|Magnet Bracket (A-15257) and Magnet Coil (20-9247)
|[[Media:Magnet Bracket A-15257 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:magnet-2.png|200px]]
|Threaded Core Weld Assembly (515-6141-01) and Magnet Coil (20-9247)
|[[Media:Threaded Core Weld Assembly 515-6141-01 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:pop-bumper.png|200px]]
|Pop Bumper Assembly Williams Bally
|[[Media:Pop Bumper Assembly Williams Bally.dwg]]
|-
|[[Image:slingshot-assembly.png|200px]]
|Slingshot Assembly (500-5849-00)
|[[Media:Slingshot Assembly - 500-5849-00.dwg]]
|}

=== Inserts ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:insert-1-1-2.png|200px]]
|Insert 1 1/2" Arrow
|[[Media:Insert 1 1-2 in Arrow.dwg]]
|-
|[[Image:insert-1-1-2-r.png|200px]]
|Insert 1 1/2" Rectangle
|[[Media:Insert 1 1-2 in Rectangle.dwg]]
|-
|[[Image:insert-1-1-2-ro.png|200px]]
|Insert 1 1/2" Round
|[[Media:Insert 1 1-2 in Round.dwg]]
|-
|[[Image:insert-1-3-16-r.png|200px]]
|Insert 1 3/16" Round
|[[Media:Insert 1 3-16 in Round.dwg]]
|-
|[[Image:insert-1-3-16-t.png|200px]]
|Insert 1 3/16" Triangle
|[[Media:Insert 1 3-16 in Triangle.dwg]]
|-
|[[Image:insert-1-5-8.png|200px]]
|Insert 1 5/8" Oval
|[[Media:Insert 1 5-8 in Oval.dwg]]
|-
|[[Image:insert-1-s.png|200px]]
|Insert 1" Square
|[[Media:Insert 1 in Square.dwg]]
|-
|[[Image:insert-1-r.png|200px]]
|Insert 1" Round
|[[Media:Insert 1 in Round.dwg]]
|-
|[[Image:insert-2-a.png|200px]]
|Insert 2" Arrow
|[[Media:Insert 2 in Arrow.dwg]]
|-
|[[Image:insert-3-4-r.png|200px]]
|Insert 3/4" Round
|[[Media:Insert 3-4 in Round.dwg]]
|-
|[[Image:insert-3-4-s.png|200px]]
|Insert 3/4" Square
|[[Media:Insert 3-4 in Square.dwg]]
|-
|[[Image:insert-5-8-r.png|200px]]
|Insert 5/8" Round
|[[Media:Insert 5-8 in Round.dwg]]
|}

=== Lights ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:socket-l.png|200px]]
|44 Socket Under Playfield Long (077-5005-00)
|[[Media:Socket Under Playfield Long 077-5005-00.dwg]]
|-
|[[Image:socket-s-1.png|200px]]
|44 Socket Under Playfield Short (077-5002-00)
|[[Media:Socket Under Playfield Short 077-5002-00.dwg]]
|-
|[[Image:socket-s-2.png|200px]]
|89 Socket Under Playfield Short (077-5101-00)
|[[Media:Socket Under Playfield Short 077-5101-00.dwg]]
|}
=== Switches ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:switch.png|200px]]
|Rollover Switch and Bracket (A-12688)
|[[Media:Rollover Switch and Bracket A-12688.dwg]]
|-
|[[Image:spinner-assembly.png|200px]]
|Spinner Assembly (A-21801-2)
|[[Media:Spinner Assembly A-21801-2.dwg]]
|-
|[[Image:standup-target.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4)
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4.dwg]]
|-
|[[Image:standup-target-2.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 2
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 2).dwg]]
|-
|[[Image:standup-target-3.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 3
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 3).dwg]]
|-
|[[Image:5-target-bank.png|200px]]
|Drop Target Bank of 5
|[[Media:Drop Target Bank of 5.dwg]]
|}

== 3D Templates ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:pop-bumper-template.jpg|200px]]
|Williams Pop Bumper Template
|[[File:pop-bumper-template.stl]]
|-
|[[Image:pop-bumper-template-center.jpg|200px]]
|Williams Pop Bumper Template Center Holes
|[[File:pop-bumper-template-center.stl]]
|-
|[[Image:sling-template.png|200px]]
|Williams Slingshot Template
|[[File:slingshot-template.stl]]
|-
|[[Image:sling-template-center.png|200px]]
|Williams Slingshot Template Center Holes
|[[File:sling-template-center.stl]]
|-
|[[Image:Lamp Socket Bally E-120-81.png|200px]]
|44 Socket Under Playfield Short (Bally E-120-81)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-81.zip]]
|-
|[[Image:Lamp Socket Bally E-120-99.PNG|200px]]
|44 Socket Under Playfield Flush (Bally E-120-99)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-99.zip]]
|-
|[[Image:Lamp Socket Bally E-120-162.png|200px]]
|44 Socket Under Playfield (Bally E-120-162)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-162.zip]]
|-
|[[Image:Lamp Socket Bally- Possibly E-120-84.png|200px]]
|44 Socket Under Playfield (Possibly Bally E-120-84)
Solidworks 2013
|[[Media:Lamp Socket Bally- Possibly E-120-84.zip]]
|-
|[[Image:WPC Trough.png|200px]]
|WPC Trough Assembly
Solidworks 2013
|[[Media:WPC Trough.zip]]
|-
|[[Image:Pop Bumper ASSY B-9414.png|200px]]
|WPC Pop Bumper Assembly
Solidworks 2013
|[[Media:WPC Pop Bumper Assy B-9414.zip]]
|-
|[[Image:3 Bank Drop Target ASSY D-7931-3S.png|200px]]
|3 bank Drop Target SYS 7
Solidworks 2013
|[[Media:3 Bank Drop Target ASSY D-7931-3S.zip]]
|-
|[[Image:3 Bank Drop Target Sys11.png|200px]]
|3 bank Drop Target SYS11 (PCB Not to Scale)
Solidworks 2013
|[[Media:3 bank Sys11 Drop Target Bank.zip]]
|-
|[[Image:Target 03-8033.png|200px]]
|Drop Target Wedge Top
Solidworks 2013
|[[Media:Target 03-8033.SLDPRT]]
|-
|[[Image:Kicker Arm Sllingshot Assembly B-12665.png|200px]]
|Kicker Arm Slingshot Assembly B-12665
Solidworks 2013
|[[Media:Kicker Arm Sllingshot Assembly B-12665.zip]]
|-
|[[Image:Kickout Hole SYS7.png|200px]]
|Kickout Hole Sys 7
Solidworks 2013
|[[Media:Kickout Hole SYS7.zip]]
|-
|[[Image:Rollover Lane Switch.png|200px]]
|Rollover Lane Microswitch
Solidworks 2013
|[[Media:Rollover Lane Switch.zip]]
|-
|[[Image:Target 002 Assy.png|200px]]
|Target 002
Solidworks 2013
|[[Media:Target 002 Assy.zip]]
|-
|[[Image:Target 003 Assy.png|200px]]
|Target 003
Solidworks 2013
|[[Media:Target 003 Assy.zip]]
|-
|[[Image:Target 004 Assy.png|200px]]
|Target 004
Solidworks 2013
|[[Media:Target 004 Assy.zip]]
|-
|[[Image:Target 005 Assy.png|200px]]
|Target 005
Solidworks 2013
|[[Media:Target 005 Assy.zip]]
|-
|[[Image:Star Post PL-00172-OT.png|200px]]
|Star Post 1" - PL-00172-OT
Solidworks 2013
|[[Media:Star Post PL-00172-OT.SLDPRT]]
|-
|[[Image:Star Post 1-1'16 -03-8319-13.png|200px]]
|Star Post 1-1/16"" - 03-8319-13
Solidworks 2013
|[[Media:Star Post 1-1'16 -03-8319-13.SLDPRT]]
|-
|[[Image:Star Post 1-3'16 -03-8370-10.png|200px]]
|Star Post 1-3/16"" - 03-8370-10
Solidworks 2013
|[[Media:Star Post 1-3'16 -03-8370-10.SLDPRT]]
|-
|[[Image:Double Star Post 1-1^2 -03-8130-9.png|200px]]
|Double Star Post - 1-1/2" 03-8130-9
Solidworks 2013
|[[Media:Double Star Post 1-1^2 -03-8130-9.SLDPRT]]
|-
|[[Image:Double Star Post .png|200px]]
|Double Star Post - 1-1/16" 03-8247-13
Solidworks 2013
|[[Media:Double Star Post.SLDPRT]]
|-
|[[Image:Post Faceted 1 inch C-11561-20 .png|200px]]
|Post Faceted 1" C-11561-20
Solidworks 2013
|[[Media:Post Faceted 1 inch C-11561-20.SLDPRT]]
|-
|[[Image:Post Faceted 1-3`16 C-11562-20.png|200px]]
|Post Faceted 1-3/16" C-11562-20
Solidworks 2013
|[[Media:Post Faceted 1-3`16 C-11562-20.SLDPRT]]
|-
|[[Image:Post 1 inch Concentric Fin C-951-4 .png|200px]]
|Post 1" Concentric Fin C-951-4
Solidworks 2013
|[[Media:Post 1 inch Concentric Fin C-951-4.SLDPRT]]
|-
|[[Image:Post 1-1`8 Concentric Fin C-952-7 .png|200px]]
|Post 1-1/8" Concentric Fin C-952-7
Solidworks 2013
|[[Media:Post 1-1`8 Concentric Fin C-952-7.SLDPRT]]
|-
|[[Image:Mini Post - Plastic 550-5052-02 .png|200px]]
|Mini Post - Plastic 550-5052-02
Solidworks 2013
|[[Media:Mini Post - Plastic 550-5052-02.SLDPRT]]
|-
|[[Image:Bumper Post 8-32 Thread bottom 6-32 at Top 024056 .png|200px]]
|Bumper Post 8-32 Thread at Bottom, 6-32 at Top 02-4056
Solidworks 2013
|[[Media:Bumper Post 8-32 Thread bottom 6-32 at Top 024056.SLDPRT]]
|-
|[[Image:Mini Post 6-32 Thread 02-4195.png|200px]]
|Mini Post 6-32 Thread 02-4195
Solidworks 2013
|[[Media:Mini Post 6-32 Thread 02-4195.SLDPRT]]
|-
|[[Image:Mini Post 8-32 Thread.png|200px]]
|Mini Post 8-32 Thread
Solidworks 2013
|[[Media:Mini Post 8-32 Thread.SLDPRT]]
|-
|[[Image:Mini Post 10-32 Thread.png|200px]]
|Mini Post 10-32 Thread
Solidworks 2013
|[[Media:Mini Post 10-32 Thread.SLDPRT]]
|-
|[[Image:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.png|200px]]
|Post-Dual Ring 8-32 Thread at Bottom, 6-32 at top 02-4423
Solidworks 2013
|[[Media:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0001.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-5/8"
Solidworks 2013
|[[Media:Threaded Post Screw 0001.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0002.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-1/2"
Solidworks 2013
|[[Media:Threaded Post Screw 0002.SLDPRT]]
|-
|[[Image:Rubber Post Cap.png|200px]]
|Rubber Post Cap
Solidworks 2013
|[[Media:Rubber Post Cap.SLDPRT]]
|-
|[[Image:Insert - 1 inch RND PL-1ROT.png|200px]]
|1" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1 inch RND PL-1ROT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch RND PL-1316RBT.png|200px]]
|1-3/16" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1-3`16 inch RND PL-1316RBT.SLDPRT]]
|-
|[[Image:Insert - 5`8 inch RND PL-58ROS.png|200px]]
|5/8" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 5`8 inch RND PL-58ROS.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch RND PL-34RAS.png|200px]]
|3/4" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch RND PL-34RAS.SLDPRT]]
|-
|[[Image:Insert - 1-1`2 inch RND PL-112ROT.png|200px]]
|1-1/2" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1-1`2 inch RND PL-112ROT.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch Square PL-34SSB.png|200px]]
|3/4" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch Square PL-34SSB.SLDPRT]]
|-
|[[Image:Insert - 1inch Square PL-1SSG.png|200px]]
|1" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1inch Square PL-1SSG.SLDPRT]]
|-
|[[Image:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.png|200px]]
|3/4 x 1-1/2" Rectangular Insert - "Grid" Pattern
Solidworks 2013
|[[Media:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.SLDPRT]]
|-
|[[Image:Insert - 1-5`8 inch OVAL PI-11234--OGT.png|200px]]
|3/4 x 1-5/8" Oval Insert
Solidworks 2013
|[[Media:Insert - 1-5`8 inch OVAL PI-11234--OGT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch Tri PI-1316TOS.png|200px]]
|1-3/6"" Triangular Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`16 inch Tri PI-1316TOS.SLDPRT]]
|-
|[[Image:Insert - 1-3`4 inch Diamond PL-134DBT.png|200px]]
|1-3/4 x 3/4"" Diamond Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`4 inch Diamond PL-134DBT.SLDPRT]]
|-
|[[Image:Rollover C-901.png|200px]]
|Rollover Insert C-901
Solidworks 2013
|[[Media:Rollover C-9901.zip]]
|-
|[[Image:Lane Guide 03-8318-25.PNG|200px]]
|Lane Guide 03-8318-25
Solidworks 2013
|[[Media:Lane Guide 03-8318-25.SLDPRT]]
|-
|[[Image:Lane Guide.PNG|200px]]
|Lane Guide
Solidworks 2013
|[[Media:Lane Guide.SLDPRT]]
|-
|[[Image:Ball Gate Assembly - RT A-8096-R.PNG|200px]]
|Ball Gate Assembly - RT A-8096-R
Solidworks 2013
|[[Media:Ball Gate Assembly - RT A-8096-R.ZIP]]
|-
|[[Image:Gate Assy 0001.PNG|200px]]
|Ball Gate Assembly -
Solidworks 2013
|[[Media:Gate Assy 0001.ZIP]]
|-
|[[Image:Flipper Assembly WPC.png|200px]]
|Flipper Assembly WPC (coil is incorrect)
Solidworks 2013
|[[Media:Flipper Assembly WPC.zip]]
|-
|[[Image:Flipper Bat 2inch.PNG|200px]]
|Flipper Bat 2 Inch
Solidworks 2013
|[[Media:Flipper Bat 2inch.zip]]
|-
|[[Image:Flipper Bat 3inch.PNG|200px]]
|Gate Assembly
Solidworks 2013
|[[Media:Gate Assy 0001.zip]]
|-
|[[Image:Opto Base MTG.png|200px]]
|Opto Base Mounting
Solidworks 2013
|[[Media:Opto Base MTG.sldprt]]
|-
|[[Image:PF Test1.PNG|200px]]
|Test PF shooter lane cut
Solidworks 2013
|[[Media:Test PF 1.sldprt]]
|}

= Business Plan =

Documents outlining what it takes to move a pinball project from a hobby to a business

Files Section

2015-06-08T09:15:26Z

BobLangelius: /* 3D Templates */

== Diagrams ==

Drawings and other diagrams with dimensions not in CAD format.

=== Cabinet ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:wpc-backbox-1.png|200px]]
|WPC Backbox (in millimeters)
|[[Media:wpc-backbox-1.png]]
|-
|[[Image:wpc-cabinet-1.png|200px]]
|WPC full cabinet cut guide for 4" x 8" plywood
|[[Media:wpc-cabinet-1.png]]
|-
|[[Image:wpc-cabinet-2.png|200px]]
|WPC Main cabinet side and back (in millimeters)
|[[Media:wpc-cabinet-2.png]]
|-
|[[Image:wpc-cabinet-3.png|200px]]
|WPC Cabinet front (in millimeters)
|[[Media:wpc-cabinet-3.png]]
|-
|[[Image:wpc-cabinet-4.png|200px]]
|WPC Cabinet front for multiple ball launchers (in millimeters)
|[[Media:wpc-cabinet-4.png]]
|}

=== Playfield ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:williams-lower-playfield.png|200px]]
|WPC lower playfield dimensions (millimeter)
|[[Media:williams-lower-playfield.png]]
|-
|[[Image:williams-early-ss.jpg|200px]]
|Williams Early Solid State lower playfield
C-size for sending to print store (inches)
|[[Media:Williams_early_SS_c_size.pdf]]
|-
|[[Image:stern-lower-pf.jpg|200px]]
|Stern lower playfield
C-size for sending to print store (inches)
|[[Media:Stern_c_size.pdf]]
|}

=== Devices ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-trough-diagram.png|200px]]
|Ball Trough (6-Ball)
|[[Media:6balltrough.ai]]
|}

== Schematics ==

Files for EagleCAD or general electronic schematics.

=== Original Equipment ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:gottlieb-system-3-image.png|200px]]
|Gottlieb System 3 Driver Board
|[[Media:gottlieb-system-3.pdf]]
|-
|[[Image:wpc-sw.png|200px]]
|WPC Switch Matrix design
|[[Media:wpc-sw.pdf]]
|-
|[[Image:wpc-lamp.png|200px]]
|WPC Lamp Matrix design
|[[Media:wpc-lamp.pdf]]
|-
|[[Image:wpc-solenoid.png|200px]]
|WPC Solenoid design
|[[Media:wpc-solenoid.pdf]]
|}

== CAD Drawings ==

For use in AutoCAD or DraftSight when doing playfield layout.

=== Playfields ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Stern_playfield.jpg|200px]]
|Stern Playfield
|[[Media:Stern_playfield.dwg]]
|-
|[[Image:Stern_playfield_3d.jpg|200px]]
|Stern Playfield
|[[Media:Stern_blank_playfield.SLDPRT]]
|-
|[[Image:Stern_Playfield_Sketchup.jpg|200px]]
|Stern Playfield for Sketchup
|[[Media:Stern_Playfield.skp]]
|-
|[[Image:Williams_playfield.jpg|200px]]
|Williams Early SS playfield
|[[Media:Williams_playfield.dwg]]
|-
|[[Image:Williams_Playfield.jpg|200px]]
|Williams Early SS playfield for Sketchup
|[[Media:Williams_Blank_Playfield.skp]]
|-
|[[Image:bally-ss.jpg|200px]]
|Bally SS Blank Playfield
|[[Media:bally-blank.dwg]]
|}

=== Ball Guides ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-inlane-guide.png|200px]]
|Ball Inlane Guide
|[[Media:Ball Inlane Guide (left) - 550-5037-01.dwg]]
|-
|[[Image:ball-lane-guide-top.png|200px]]
|Ball Lane Guide Top Double Sided (03-7034) and Star Posts (03-8319) w/5-16 in rubber
|[[Media:Ball Lane Guide Top Double Sided - 03-7034 - and Star Posts - 03-8319 w 5-16 in rubber.dwg]]
|-
|[[Image:metal-post-1-7-8.png|200px]]
|Metal Post 1 7/8" (530-5005-00) with 7/16" OD Mini Post Rubber (23-6694-1)
|[[Media:Metal Post 1 7-8 in tall 530-5005-00 w 7-16 in OD Mini Post Rubber 23-6694-1.dwg]]
|-
|[[Image:metal-post-2-1-8.png|200px]]
|Metal Post 2 1/8" (530-5332-01) with Bumper Post Sleeve 1 1/16"
|[[Media:Metal Post 2 1-8 in tall 530-5332-01 w Bumper Post Sleeve 1 1-16 in.dwg]]
|-
|[[Image:plastic-post.png|200px]]
|Narrow Plastic Post (03-8365) with 3/16" rubber
|[[Media:Narrow Plastic Post 03-8365 w 3-16 in rubber.dwg]]
|-
|[[Image:spade-bolt.png|200px]]
|Spade Bolt (Offset)
|[[Media:Spade Bolt (Offset).dwg]]
|-
|[[Image:star-post.png|200px]]
|Star Post (03-8319)
|[[Media:Star Post - 03-8319.dwg]]
|-
|[[Image:shooter-lane.jpg|200px]]
|Shooter Lane Insert
|[[Media:shooter-lane.dwg]]
|}

=== Coil Assemblies ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-launcher.png|200px]]
|Ball Launcher (500-5477-01)
|[[Media:Ball Launcher 500-5477-01.dwg]]
|-
|[[Image:ball-trough.png|200px]]
|Ball Trough Assembly 4 Ball (500-6119-14) and Enter Exit Scoop (535-7329-01)
|[[Media:Ball Trough Assembly 4 Ball 500-6119-14 Enter Exit Scoop 535-7329-01.dwg]]
|-
|[[Image:flipper-left.png|200px]]
|Flipper Assembly (A-15205) w/left mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Left).dwg]]
|-
|[[Image:flipper-right.png|200px]]
|Flipper Assembly (A-15205) w/right mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Right).dwg]]
|-
|[[Image:magnet-1.png|200px]]
|Magnet Bracket (A-15257) and Magnet Coil (20-9247)
|[[Media:Magnet Bracket A-15257 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:magnet-2.png|200px]]
|Threaded Core Weld Assembly (515-6141-01) and Magnet Coil (20-9247)
|[[Media:Threaded Core Weld Assembly 515-6141-01 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:pop-bumper.png|200px]]
|Pop Bumper Assembly Williams Bally
|[[Media:Pop Bumper Assembly Williams Bally.dwg]]
|-
|[[Image:slingshot-assembly.png|200px]]
|Slingshot Assembly (500-5849-00)
|[[Media:Slingshot Assembly - 500-5849-00.dwg]]
|}

=== Inserts ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:insert-1-1-2.png|200px]]
|Insert 1 1/2" Arrow
|[[Media:Insert 1 1-2 in Arrow.dwg]]
|-
|[[Image:insert-1-1-2-r.png|200px]]
|Insert 1 1/2" Rectangle
|[[Media:Insert 1 1-2 in Rectangle.dwg]]
|-
|[[Image:insert-1-1-2-ro.png|200px]]
|Insert 1 1/2" Round
|[[Media:Insert 1 1-2 in Round.dwg]]
|-
|[[Image:insert-1-3-16-r.png|200px]]
|Insert 1 3/16" Round
|[[Media:Insert 1 3-16 in Round.dwg]]
|-
|[[Image:insert-1-3-16-t.png|200px]]
|Insert 1 3/16" Triangle
|[[Media:Insert 1 3-16 in Triangle.dwg]]
|-
|[[Image:insert-1-5-8.png|200px]]
|Insert 1 5/8" Oval
|[[Media:Insert 1 5-8 in Oval.dwg]]
|-
|[[Image:insert-1-s.png|200px]]
|Insert 1" Square
|[[Media:Insert 1 in Square.dwg]]
|-
|[[Image:insert-1-r.png|200px]]
|Insert 1" Round
|[[Media:Insert 1 in Round.dwg]]
|-
|[[Image:insert-2-a.png|200px]]
|Insert 2" Arrow
|[[Media:Insert 2 in Arrow.dwg]]
|-
|[[Image:insert-3-4-r.png|200px]]
|Insert 3/4" Round
|[[Media:Insert 3-4 in Round.dwg]]
|-
|[[Image:insert-3-4-s.png|200px]]
|Insert 3/4" Square
|[[Media:Insert 3-4 in Square.dwg]]
|-
|[[Image:insert-5-8-r.png|200px]]
|Insert 5/8" Round
|[[Media:Insert 5-8 in Round.dwg]]
|}

=== Lights ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:socket-l.png|200px]]
|44 Socket Under Playfield Long (077-5005-00)
|[[Media:Socket Under Playfield Long 077-5005-00.dwg]]
|-
|[[Image:socket-s-1.png|200px]]
|44 Socket Under Playfield Short (077-5002-00)
|[[Media:Socket Under Playfield Short 077-5002-00.dwg]]
|-
|[[Image:socket-s-2.png|200px]]
|89 Socket Under Playfield Short (077-5101-00)
|[[Media:Socket Under Playfield Short 077-5101-00.dwg]]
|}
=== Switches ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:switch.png|200px]]
|Rollover Switch and Bracket (A-12688)
|[[Media:Rollover Switch and Bracket A-12688.dwg]]
|-
|[[Image:spinner-assembly.png|200px]]
|Spinner Assembly (A-21801-2)
|[[Media:Spinner Assembly A-21801-2.dwg]]
|-
|[[Image:standup-target.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4)
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4.dwg]]
|-
|[[Image:standup-target-2.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 2
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 2).dwg]]
|-
|[[Image:standup-target-3.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 3
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 3).dwg]]
|-
|[[Image:5-target-bank.png|200px]]
|Drop Target Bank of 5
|[[Media:Drop Target Bank of 5.dwg]]
|}

== 3D Templates ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:pop-bumper-template.jpg|200px]]
|Williams Pop Bumper Template
|[[File:pop-bumper-template.stl]]
|-
|[[Image:pop-bumper-template-center.jpg|200px]]
|Williams Pop Bumper Template Center Holes
|[[File:pop-bumper-template-center.stl]]
|-
|[[Image:sling-template.png|200px]]
|Williams Slingshot Template
|[[File:slingshot-template.stl]]
|-
|[[Image:sling-template-center.png|200px]]
|Williams Slingshot Template Center Holes
|[[File:sling-template-center.stl]]
|-
|[[Image:Lamp Socket Bally E-120-81.png|200px]]
|44 Socket Under Playfield Short (Bally E-120-81)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-81.zip]]
|-
|[[Image:Lamp Socket Bally E-120-99.PNG|200px]]
|44 Socket Under Playfield Flush (Bally E-120-99)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-99.zip]]
|-
|[[Image:Lamp Socket Bally E-120-162.png|200px]]
|44 Socket Under Playfield (Bally E-120-162)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-162.zip]]
|-
|[[Image:Lamp Socket Bally- Possibly E-120-84.png|200px]]
|44 Socket Under Playfield (Possibly Bally E-120-84)
Solidworks 2013
|[[Media:Lamp Socket Bally- Possibly E-120-84.zip]]
|-
|[[Image:WPC Trough.png|200px]]
|WPC Trough Assembly
Solidworks 2013
|[[Media:WPC Trough.zip]]
|-
|[[Image:Pop Bumper ASSY B-9414.png|200px]]
|WPC Pop Bumper Assembly
Solidworks 2013
|[[Media:WPC Pop Bumper Assy B-9414.zip]]
|-
|[[Image:3 Bank Drop Target ASSY D-7931-3S.png|200px]]
|3 bank Drop Target SYS 7
Solidworks 2013
|[[Media:3 Bank Drop Target ASSY D-7931-3S.zip]]
|-
|[[Image:3 Bank Drop Target Sys11.png|200px]]
|3 bank Drop Target SYS11 (PCB Not to Scale)
Solidworks 2013
|[[Media:3 bank Sys11 Drop Target Bank.zip]]
|-
|[[Image:Target 03-8033.png|200px]]
|Drop Target Wedge Top
Solidworks 2013
|[[Media:Target 03-8033.SLDPRT]]
|-
|[[Image:Kicker Arm Sllingshot Assembly B-12665.png|200px]]
|Kicker Arm Slingshot Assembly B-12665
Solidworks 2013
|[[Media:Kicker Arm Sllingshot Assembly B-12665.zip]]
|-
|[[Image:Kickout Hole SYS7.png|200px]]
|Kickout Hole Sys 7
Solidworks 2013
|[[Media:Kickout Hole SYS7.zip]]
|-
|[[Image:Rollover Lane Switch.png|200px]]
|Rollover Lane Microswitch
Solidworks 2013
|[[Media:Rollover Lane Switch.zip]]
|-
|[[Image:Target 002 Assy.png|200px]]
|Target 002
Solidworks 2013
|[[Media:Target 002 Assy.zip]]
|-
|[[Image:Target 003 Assy.png|200px]]
|Target 003
Solidworks 2013
|[[Media:Target 003 Assy.zip]]
|-
|[[Image:Target 004 Assy.png|200px]]
|Target 004
Solidworks 2013
|[[Media:Target 004 Assy.zip]]
|-
|[[Image:Target 005 Assy.png|200px]]
|Target 005
Solidworks 2013
|[[Media:Target 005 Assy.zip]]
|-
|[[Image:Star Post PL-00172-OT.png|200px]]
|Star Post 1" - PL-00172-OT
Solidworks 2013
|[[Media:Star Post PL-00172-OT.SLDPRT]]
|-
|[[Image:Star Post 1-1'16 -03-8319-13.png|200px]]
|Star Post 1-1/16"" - 03-8319-13
Solidworks 2013
|[[Media:Star Post 1-1'16 -03-8319-13.SLDPRT]]
|-
|[[Image:Star Post 1-3'16 -03-8370-10.png|200px]]
|Star Post 1-3/16"" - 03-8370-10
Solidworks 2013
|[[Media:Star Post 1-3'16 -03-8370-10.SLDPRT]]
|-
|[[Image:Double Star Post 1-1^2 -03-8130-9.png|200px]]
|Double Star Post - 1-1/2" 03-8130-9
Solidworks 2013
|[[Media:Double Star Post 1-1^2 -03-8130-9.SLDPRT]]
|-
|[[Image:Double Star Post .png|200px]]
|Double Star Post - 1-1/16" 03-8247-13
Solidworks 2013
|[[Media:Double Star Post.SLDPRT]]
|-
|[[Image:Post Faceted 1 inch C-11561-20 .png|200px]]
|Post Faceted 1" C-11561-20
Solidworks 2013
|[[Media:Post Faceted 1 inch C-11561-20.SLDPRT]]
|-
|[[Image:Post Faceted 1-3`16 C-11562-20.png|200px]]
|Post Faceted 1-3/16" C-11562-20
Solidworks 2013
|[[Media:Post Faceted 1-3`16 C-11562-20.SLDPRT]]
|-
|[[Image:Post 1 inch Concentric Fin C-951-4 .png|200px]]
|Post 1" Concentric Fin C-951-4
Solidworks 2013
|[[Media:Post 1 inch Concentric Fin C-951-4.SLDPRT]]
|-
|[[Image:Post 1-1`8 Concentric Fin C-952-7 .png|200px]]
|Post 1-1/8" Concentric Fin C-952-7
Solidworks 2013
|[[Media:Post 1-1`8 Concentric Fin C-952-7.SLDPRT]]
|-
|[[Image:Mini Post - Plastic 550-5052-02 .png|200px]]
|Mini Post - Plastic 550-5052-02
Solidworks 2013
|[[Media:Mini Post - Plastic 550-5052-02.SLDPRT]]
|-
|[[Image:Bumper Post 8-32 Thread bottom 6-32 at Top 024056 .png|200px]]
|Bumper Post 8-32 Thread at Bottom, 6-32 at Top 02-4056
Solidworks 2013
|[[Media:Bumper Post 8-32 Thread bottom 6-32 at Top 024056.SLDPRT]]
|-
|[[Image:Mini Post 6-32 Thread 02-4195.png|200px]]
|Mini Post 6-32 Thread 02-4195
Solidworks 2013
|[[Media:Mini Post 6-32 Thread 02-4195.SLDPRT]]
|-
|[[Image:Mini Post 8-32 Thread.png|200px]]
|Mini Post 8-32 Thread
Solidworks 2013
|[[Media:Mini Post 8-32 Thread.SLDPRT]]
|-
|[[Image:Mini Post 10-32 Thread.png|200px]]
|Mini Post 10-32 Thread
Solidworks 2013
|[[Media:Mini Post 10-32 Thread.SLDPRT]]
|-
|[[Image:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.png|200px]]
|Post-Dual Ring 8-32 Thread at Bottom, 6-32 at top 02-4423
Solidworks 2013
|[[Media:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0001.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-5/8"
Solidworks 2013
|[[Media:Threaded Post Screw 0001.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0002.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-1/2"
Solidworks 2013
|[[Media:Threaded Post Screw 0002.SLDPRT]]
|-
|[[Image:Rubber Post Cap.png|200px]]
|Rubber Post Cap
Solidworks 2013
|[[Media:Rubber Post Cap.SLDPRT]]
|-
|[[Image:Insert - 1 inch RND PL-1ROT.png|200px]]
|1" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1 inch RND PL-1ROT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch RND PL-1316RBT.png|200px]]
|1-3/16" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1-3`16 inch RND PL-1316RBT.SLDPRT]]
|-
|[[Image:Insert - 5`8 inch RND PL-58ROS.png|200px]]
|5/8" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 5`8 inch RND PL-58ROS.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch RND PL-34RAS.png|200px]]
|3/4" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch RND PL-34RAS.SLDPRT]]
|-
|[[Image:Insert - 1-1`2 inch RND PL-112ROT.png|200px]]
|1-1/2" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1-1`2 inch RND PL-112ROT.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch Square PL-34SSB.png|200px]]
|3/4" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch Square PL-34SSB.SLDPRT]]
|-
|[[Image:Insert - 1inch Square PL-1SSG.png|200px]]
|1" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1inch Square PL-1SSG.SLDPRT]]
|-
|[[Image:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.png|200px]]
|3/4 x 1-1/2" Rectangular Insert - "Grid" Pattern
Solidworks 2013
|[[Media:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.SLDPRT]]
|-
|[[Image:Insert - 1-5`8 inch OVAL PI-11234--OGT.png|200px]]
|3/4 x 1-5/8" Oval Insert
Solidworks 2013
|[[Media:Insert - 1-5`8 inch OVAL PI-11234--OGT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch Tri PI-1316TOS.png|200px]]
|1-3/6"" Triangular Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`16 inch Tri PI-1316TOS.SLDPRT]]
|-
|[[Image:Insert - 1-3`4 inch Diamond PL-134DBT.png|200px]]
|1-3/4 x 3/4"" Diamond Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`4 inch Diamond PL-134DBT.SLDPRT]]
|-
|[[Image:Rollover C-901.png|200px]]
|Rollover Insert C-901
Solidworks 2013
|[[Media:Rollover C-9901.zip]]
|-
|[[Image:Lane Guide 03-8318-25.PNG|200px]]
|Lane Guide 03-8318-25
Solidworks 2013
|[[Media:Lane Guide 03-8318-25.SLDPRT]]
|-
|[[Image:Lane Guide.PNG|200px]]
|Lane Guide
Solidworks 2013
|[[Media:Lane Guide.SLDPRT]]
|-
|[[Image:Ball Gate Assembly - RT A-8096-R.PNG|200px]]
|Ball Gate Assembly - RT A-8096-R
Solidworks 2013
|[[Media:Ball Gate Assembly - RT A-8096-R.ZIP]]
|-
|[[Image:Ball Gate Assembly - RT A-8096-R.PNG|200px]]
|Ball Gate Assembly - RT A-8096-R
Solidworks 2013
|[[Media:Ball Gate Assembly - RT A-8096-R.ZIP]]
|-
|[[Image:Flipper Assembly WPC.png|200px]]
|Flipper Assembly WPC (coil is incorrect)
Solidworks 2013
|[[Media:Flipper Assembly WPC.zip]]
|-
|[[Image:Flipper Bat 2inch.PNG|200px]]
|Flipper Bat 2 Inch
Solidworks 2013
|[[Media:Flipper Bat 2inch.zip]]
|-
|[[Image:Flipper Bat 3inch.PNG|200px]]
|Gate Assembly
Solidworks 2013
|[[Media:Gate Assy 0001.zip]]
|-
|[[Image:Opto Base MTG.png|200px]]
|Opto Base Mounting
Solidworks 2013
|[[Media:Opto Base MTG.sldprt]]
|-
|[[Image:PF Test1.PNG|200px]]
|Test PF shooter lane cut
Solidworks 2013
|[[Media:Test PF 1.sldprt]]
|}

= Business Plan =

Documents outlining what it takes to move a pinball project from a hobby to a business

Files Section

2015-06-08T09:14:05Z

BobLangelius: /* 3D Templates */

== Diagrams ==

Drawings and other diagrams with dimensions not in CAD format.

=== Cabinet ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:wpc-backbox-1.png|200px]]
|WPC Backbox (in millimeters)
|[[Media:wpc-backbox-1.png]]
|-
|[[Image:wpc-cabinet-1.png|200px]]
|WPC full cabinet cut guide for 4" x 8" plywood
|[[Media:wpc-cabinet-1.png]]
|-
|[[Image:wpc-cabinet-2.png|200px]]
|WPC Main cabinet side and back (in millimeters)
|[[Media:wpc-cabinet-2.png]]
|-
|[[Image:wpc-cabinet-3.png|200px]]
|WPC Cabinet front (in millimeters)
|[[Media:wpc-cabinet-3.png]]
|-
|[[Image:wpc-cabinet-4.png|200px]]
|WPC Cabinet front for multiple ball launchers (in millimeters)
|[[Media:wpc-cabinet-4.png]]
|}

=== Playfield ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:williams-lower-playfield.png|200px]]
|WPC lower playfield dimensions (millimeter)
|[[Media:williams-lower-playfield.png]]
|-
|[[Image:williams-early-ss.jpg|200px]]
|Williams Early Solid State lower playfield
C-size for sending to print store (inches)
|[[Media:Williams_early_SS_c_size.pdf]]
|-
|[[Image:stern-lower-pf.jpg|200px]]
|Stern lower playfield
C-size for sending to print store (inches)
|[[Media:Stern_c_size.pdf]]
|}

=== Devices ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-trough-diagram.png|200px]]
|Ball Trough (6-Ball)
|[[Media:6balltrough.ai]]
|}

== Schematics ==

Files for EagleCAD or general electronic schematics.

=== Original Equipment ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:gottlieb-system-3-image.png|200px]]
|Gottlieb System 3 Driver Board
|[[Media:gottlieb-system-3.pdf]]
|-
|[[Image:wpc-sw.png|200px]]
|WPC Switch Matrix design
|[[Media:wpc-sw.pdf]]
|-
|[[Image:wpc-lamp.png|200px]]
|WPC Lamp Matrix design
|[[Media:wpc-lamp.pdf]]
|-
|[[Image:wpc-solenoid.png|200px]]
|WPC Solenoid design
|[[Media:wpc-solenoid.pdf]]
|}

== CAD Drawings ==

For use in AutoCAD or DraftSight when doing playfield layout.

=== Playfields ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:Stern_playfield.jpg|200px]]
|Stern Playfield
|[[Media:Stern_playfield.dwg]]
|-
|[[Image:Stern_playfield_3d.jpg|200px]]
|Stern Playfield
|[[Media:Stern_blank_playfield.SLDPRT]]
|-
|[[Image:Stern_Playfield_Sketchup.jpg|200px]]
|Stern Playfield for Sketchup
|[[Media:Stern_Playfield.skp]]
|-
|[[Image:Williams_playfield.jpg|200px]]
|Williams Early SS playfield
|[[Media:Williams_playfield.dwg]]
|-
|[[Image:Williams_Playfield.jpg|200px]]
|Williams Early SS playfield for Sketchup
|[[Media:Williams_Blank_Playfield.skp]]
|-
|[[Image:bally-ss.jpg|200px]]
|Bally SS Blank Playfield
|[[Media:bally-blank.dwg]]
|}

=== Ball Guides ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-inlane-guide.png|200px]]
|Ball Inlane Guide
|[[Media:Ball Inlane Guide (left) - 550-5037-01.dwg]]
|-
|[[Image:ball-lane-guide-top.png|200px]]
|Ball Lane Guide Top Double Sided (03-7034) and Star Posts (03-8319) w/5-16 in rubber
|[[Media:Ball Lane Guide Top Double Sided - 03-7034 - and Star Posts - 03-8319 w 5-16 in rubber.dwg]]
|-
|[[Image:metal-post-1-7-8.png|200px]]
|Metal Post 1 7/8" (530-5005-00) with 7/16" OD Mini Post Rubber (23-6694-1)
|[[Media:Metal Post 1 7-8 in tall 530-5005-00 w 7-16 in OD Mini Post Rubber 23-6694-1.dwg]]
|-
|[[Image:metal-post-2-1-8.png|200px]]
|Metal Post 2 1/8" (530-5332-01) with Bumper Post Sleeve 1 1/16"
|[[Media:Metal Post 2 1-8 in tall 530-5332-01 w Bumper Post Sleeve 1 1-16 in.dwg]]
|-
|[[Image:plastic-post.png|200px]]
|Narrow Plastic Post (03-8365) with 3/16" rubber
|[[Media:Narrow Plastic Post 03-8365 w 3-16 in rubber.dwg]]
|-
|[[Image:spade-bolt.png|200px]]
|Spade Bolt (Offset)
|[[Media:Spade Bolt (Offset).dwg]]
|-
|[[Image:star-post.png|200px]]
|Star Post (03-8319)
|[[Media:Star Post - 03-8319.dwg]]
|-
|[[Image:shooter-lane.jpg|200px]]
|Shooter Lane Insert
|[[Media:shooter-lane.dwg]]
|}

=== Coil Assemblies ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:ball-launcher.png|200px]]
|Ball Launcher (500-5477-01)
|[[Media:Ball Launcher 500-5477-01.dwg]]
|-
|[[Image:ball-trough.png|200px]]
|Ball Trough Assembly 4 Ball (500-6119-14) and Enter Exit Scoop (535-7329-01)
|[[Media:Ball Trough Assembly 4 Ball 500-6119-14 Enter Exit Scoop 535-7329-01.dwg]]
|-
|[[Image:flipper-left.png|200px]]
|Flipper Assembly (A-15205) w/left mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Left).dwg]]
|-
|[[Image:flipper-right.png|200px]]
|Flipper Assembly (A-15205) w/right mounted flipper
|[[Media:Flipper Assy - Williams A-15205 (Right).dwg]]
|-
|[[Image:magnet-1.png|200px]]
|Magnet Bracket (A-15257) and Magnet Coil (20-9247)
|[[Media:Magnet Bracket A-15257 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:magnet-2.png|200px]]
|Threaded Core Weld Assembly (515-6141-01) and Magnet Coil (20-9247)
|[[Media:Threaded Core Weld Assembly 515-6141-01 and Magnet Coil 20-9247.dwg]]
|-
|[[Image:pop-bumper.png|200px]]
|Pop Bumper Assembly Williams Bally
|[[Media:Pop Bumper Assembly Williams Bally.dwg]]
|-
|[[Image:slingshot-assembly.png|200px]]
|Slingshot Assembly (500-5849-00)
|[[Media:Slingshot Assembly - 500-5849-00.dwg]]
|}

=== Inserts ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:insert-1-1-2.png|200px]]
|Insert 1 1/2" Arrow
|[[Media:Insert 1 1-2 in Arrow.dwg]]
|-
|[[Image:insert-1-1-2-r.png|200px]]
|Insert 1 1/2" Rectangle
|[[Media:Insert 1 1-2 in Rectangle.dwg]]
|-
|[[Image:insert-1-1-2-ro.png|200px]]
|Insert 1 1/2" Round
|[[Media:Insert 1 1-2 in Round.dwg]]
|-
|[[Image:insert-1-3-16-r.png|200px]]
|Insert 1 3/16" Round
|[[Media:Insert 1 3-16 in Round.dwg]]
|-
|[[Image:insert-1-3-16-t.png|200px]]
|Insert 1 3/16" Triangle
|[[Media:Insert 1 3-16 in Triangle.dwg]]
|-
|[[Image:insert-1-5-8.png|200px]]
|Insert 1 5/8" Oval
|[[Media:Insert 1 5-8 in Oval.dwg]]
|-
|[[Image:insert-1-s.png|200px]]
|Insert 1" Square
|[[Media:Insert 1 in Square.dwg]]
|-
|[[Image:insert-1-r.png|200px]]
|Insert 1" Round
|[[Media:Insert 1 in Round.dwg]]
|-
|[[Image:insert-2-a.png|200px]]
|Insert 2" Arrow
|[[Media:Insert 2 in Arrow.dwg]]
|-
|[[Image:insert-3-4-r.png|200px]]
|Insert 3/4" Round
|[[Media:Insert 3-4 in Round.dwg]]
|-
|[[Image:insert-3-4-s.png|200px]]
|Insert 3/4" Square
|[[Media:Insert 3-4 in Square.dwg]]
|-
|[[Image:insert-5-8-r.png|200px]]
|Insert 5/8" Round
|[[Media:Insert 5-8 in Round.dwg]]
|}

=== Lights ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:socket-l.png|200px]]
|44 Socket Under Playfield Long (077-5005-00)
|[[Media:Socket Under Playfield Long 077-5005-00.dwg]]
|-
|[[Image:socket-s-1.png|200px]]
|44 Socket Under Playfield Short (077-5002-00)
|[[Media:Socket Under Playfield Short 077-5002-00.dwg]]
|-
|[[Image:socket-s-2.png|200px]]
|89 Socket Under Playfield Short (077-5101-00)
|[[Media:Socket Under Playfield Short 077-5101-00.dwg]]
|}
=== Switches ===

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:switch.png|200px]]
|Rollover Switch and Bracket (A-12688)
|[[Media:Rollover Switch and Bracket A-12688.dwg]]
|-
|[[Image:spinner-assembly.png|200px]]
|Spinner Assembly (A-21801-2)
|[[Media:Spinner Assembly A-21801-2.dwg]]
|-
|[[Image:standup-target.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4)
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4.dwg]]
|-
|[[Image:standup-target-2.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 2
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 2).dwg]]
|-
|[[Image:standup-target-3.png|200px]]
|Stand Up Target Rectangle 1 1/16" (B-12001-4) Bank of 3
|[[Media:Stand Up Target Rectangle 1 1-16 in - B-12001-4 (Bank of 3).dwg]]
|-
|[[Image:5-target-bank.png|200px]]
|Drop Target Bank of 5
|[[Media:Drop Target Bank of 5.dwg]]
|}

== 3D Templates ==

{|class="wikitable"
!Image
!Description
!File
|-
|[[Image:pop-bumper-template.jpg|200px]]
|Williams Pop Bumper Template
|[[File:pop-bumper-template.stl]]
|-
|[[Image:pop-bumper-template-center.jpg|200px]]
|Williams Pop Bumper Template Center Holes
|[[File:pop-bumper-template-center.stl]]
|-
|[[Image:sling-template.png|200px]]
|Williams Slingshot Template
|[[File:slingshot-template.stl]]
|-
|[[Image:sling-template-center.png|200px]]
|Williams Slingshot Template Center Holes
|[[File:sling-template-center.stl]]
|-
|[[Image:Lamp Socket Bally E-120-81.png|200px]]
|44 Socket Under Playfield Short (Bally E-120-81)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-81.zip]]
|-
|[[Image:Lamp Socket Bally E-120-99.PNG|200px]]
|44 Socket Under Playfield Flush (Bally E-120-99)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-99.zip]]
|-
|[[Image:Lamp Socket Bally E-120-162.png|200px]]
|44 Socket Under Playfield (Bally E-120-162)
Solidworks 2013
|[[Media:Lamp Socket Bally E-120-162.zip]]
|-
|[[Image:Lamp Socket Bally- Possibly E-120-84.png|200px]]
|44 Socket Under Playfield (Possibly Bally E-120-84)
Solidworks 2013
|[[Media:Lamp Socket Bally- Possibly E-120-84.zip]]
|-
|[[Image:WPC Trough.png|200px]]
|WPC Trough Assembly
Solidworks 2013
|[[Media:WPC Trough.zip]]
|-
|[[Image:Pop Bumper ASSY B-9414.png|200px]]
|WPC Pop Bumper Assembly
Solidworks 2013
|[[Media:WPC Pop Bumper Assy B-9414.zip]]
|-
|[[Image:3 Bank Drop Target ASSY D-7931-3S.png|200px]]
|3 bank Drop Target SYS 7
Solidworks 2013
|[[Media:3 Bank Drop Target ASSY D-7931-3S.zip]]
|-
|[[Image:3 Bank Drop Target Sys11.png|200px]]
|3 bank Drop Target SYS11 (PCB Not to Scale)
Solidworks 2013
|[[Media:3 bank Sys11 Drop Target Bank.zip]]
|-
|[[Image:Target 03-8033.png|200px]]
|Drop Target Wedge Top
Solidworks 2013
|[[Media:Target 03-8033.SLDPRT]]
|-
|[[Image:Kicker Arm Sllingshot Assembly B-12665.png|200px]]
|Kicker Arm Slingshot Assembly B-12665
Solidworks 2013
|[[Media:Kicker Arm Sllingshot Assembly B-12665.zip]]
|-
|[[Image:Kickout Hole SYS7.png|200px]]
|Kickout Hole Sys 7
Solidworks 2013
|[[Media:Kickout Hole SYS7.zip]]
|-
|[[Image:Rollover Lane Switch.png|200px]]
|Rollover Lane Microswitch
Solidworks 2013
|[[Media:Rollover Lane Switch.zip]]
|-
|[[Image:Target 002 Assy.png|200px]]
|Target 002
Solidworks 2013
|[[Media:Target 002 Assy.zip]]
|-
|[[Image:Target 003 Assy.png|200px]]
|Target 003
Solidworks 2013
|[[Media:Target 003 Assy.zip]]
|-
|[[Image:Target 004 Assy.png|200px]]
|Target 004
Solidworks 2013
|[[Media:Target 004 Assy.zip]]
|-
|[[Image:Target 005 Assy.png|200px]]
|Target 005
Solidworks 2013
|[[Media:Target 005 Assy.zip]]
|-
|[[Image:Star Post PL-00172-OT.png|200px]]
|Star Post 1" - PL-00172-OT
Solidworks 2013
|[[Media:Star Post PL-00172-OT.SLDPRT]]
|-
|[[Image:Star Post 1-1'16 -03-8319-13.png|200px]]
|Star Post 1-1/16"" - 03-8319-13
Solidworks 2013
|[[Media:Star Post 1-1'16 -03-8319-13.SLDPRT]]
|-
|[[Image:Star Post 1-3'16 -03-8370-10.png|200px]]
|Star Post 1-3/16"" - 03-8370-10
Solidworks 2013
|[[Media:Star Post 1-3'16 -03-8370-10.SLDPRT]]
|-
|[[Image:Double Star Post 1-1^2 -03-8130-9.png|200px]]
|Double Star Post - 1-1/2" 03-8130-9
Solidworks 2013
|[[Media:Double Star Post 1-1^2 -03-8130-9.SLDPRT]]
|-
|[[Image:Double Star Post .png|200px]]
|Double Star Post - 1-1/16" 03-8247-13
Solidworks 2013
|[[Media:Double Star Post.SLDPRT]]
|-
|[[Image:Post Faceted 1 inch C-11561-20 .png|200px]]
|Post Faceted 1" C-11561-20
Solidworks 2013
|[[Media:Post Faceted 1 inch C-11561-20.SLDPRT]]
|-
|[[Image:Post Faceted 1-3`16 C-11562-20.png|200px]]
|Post Faceted 1-3/16" C-11562-20
Solidworks 2013
|[[Media:Post Faceted 1-3`16 C-11562-20.SLDPRT]]
|-
|[[Image:Post 1 inch Concentric Fin C-951-4 .png|200px]]
|Post 1" Concentric Fin C-951-4
Solidworks 2013
|[[Media:Post 1 inch Concentric Fin C-951-4.SLDPRT]]
|-
|[[Image:Post 1-1`8 Concentric Fin C-952-7 .png|200px]]
|Post 1-1/8" Concentric Fin C-952-7
Solidworks 2013
|[[Media:Post 1-1`8 Concentric Fin C-952-7.SLDPRT]]
|-
|[[Image:Mini Post - Plastic 550-5052-02 .png|200px]]
|Mini Post - Plastic 550-5052-02
Solidworks 2013
|[[Media:Mini Post - Plastic 550-5052-02.SLDPRT]]
|-
|[[Image:Bumper Post 8-32 Thread bottom 6-32 at Top 024056 .png|200px]]
|Bumper Post 8-32 Thread at Bottom, 6-32 at Top 02-4056
Solidworks 2013
|[[Media:Bumper Post 8-32 Thread bottom 6-32 at Top 024056.SLDPRT]]
|-
|[[Image:Mini Post 6-32 Thread 02-4195.png|200px]]
|Mini Post 6-32 Thread 02-4195
Solidworks 2013
|[[Media:Mini Post 6-32 Thread 02-4195.SLDPRT]]
|-
|[[Image:Mini Post 8-32 Thread.png|200px]]
|Mini Post 8-32 Thread
Solidworks 2013
|[[Media:Mini Post 8-32 Thread.SLDPRT]]
|-
|[[Image:Mini Post 10-32 Thread.png|200px]]
|Mini Post 10-32 Thread
Solidworks 2013
|[[Media:Mini Post 10-32 Thread.SLDPRT]]
|-
|[[Image:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.png|200px]]
|Post-Dual Ring 8-32 Thread at Bottom, 6-32 at top 02-4423
Solidworks 2013
|[[Media:Post -Dual Ring 8-32 Thread 6-32 at top 02-4423.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0001.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-5/8"
Solidworks 2013
|[[Media:Threaded Post Screw 0001.SLDPRT]]
|-
|[[Image:Threaded Post Screw 0002.png|200px]]
|Threaded Post Screw 6-32 Top and Bottom, 1-1/2"
Solidworks 2013
|[[Media:Threaded Post Screw 0002.SLDPRT]]
|-
|[[Image:Rubber Post Cap.png|200px]]
|Rubber Post Cap
Solidworks 2013
|[[Media:Rubber Post Cap.SLDPRT]]
|-
|[[Image:Insert - 1 inch RND PL-1ROT.png|200px]]
|1" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1 inch RND PL-1ROT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch RND PL-1316RBT.png|200px]]
|1-3/16" Round Insert - Smooth
Solidworks 2013
|[[Media:Insert - 1-3`16 inch RND PL-1316RBT.SLDPRT]]
|-
|[[Image:Insert - 5`8 inch RND PL-58ROS.png|200px]]
|5/8" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 5`8 inch RND PL-58ROS.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch RND PL-34RAS.png|200px]]
|3/4" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch RND PL-34RAS.SLDPRT]]
|-
|[[Image:Insert - 1-1`2 inch RND PL-112ROT.png|200px]]
|1-1/2" Round Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1-1`2 inch RND PL-112ROT.SLDPRT]]
|-
|[[Image:Insert - 3`4 inch Square PL-34SSB.png|200px]]
|3/4" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 3`4 inch Square PL-34SSB.SLDPRT]]
|-
|[[Image:Insert - 1inch Square PL-1SSG.png|200px]]
|1" Square Insert - Starburst Pattern
Solidworks 2013
|[[Media:Insert - 1inch Square PL-1SSG.SLDPRT]]
|-
|[[Image:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.png|200px]]
|3/4 x 1-1/2" Rectangular Insert - "Grid" Pattern
Solidworks 2013
|[[Media:Insert - 3`4 x 1-1`2 inch RECT PL-112REC-YT.SLDPRT]]
|-
|[[Image:Insert - 1-5`8 inch OVAL PI-11234--OGT.png|200px]]
|3/4 x 1-5/8" Oval Insert
Solidworks 2013
|[[Media:Insert - 1-5`8 inch OVAL PI-11234--OGT.SLDPRT]]
|-
|[[Image:Insert - 1-3`16 inch Tri PI-1316TOS.png|200px]]
|1-3/6"" Triangular Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`16 inch Tri PI-1316TOS.SLDPRT]]
|-
|[[Image:Insert - 1-3`4 inch Diamond PL-134DBT.png|200px]]
|1-3/4 x 3/4"" Diamond Insert - "Starburst" Pattern
Solidworks 2013
|[[Media:Insert - 1-3`4 inch Diamond PL-134DBT.SLDPRT]]
|-
|[[Image:Rollover C-901.png|200px]]
|Rollover Insert C-901
Solidworks 2013
|[[Media:Rollover C-9901.zip]]
|-
|[[Image:Lane Guide 03-8318-25.PNG|200px]]
|Lane Guide 03-8318-25
Solidworks 2013
|[[Media:Lane Guide 03-8318-25.SLDPRT]]
|-
|[[Image:Lane Guide.PNG|200px]]
|Lane Guide
Solidworks 2013
|[[Media:Lane Guide.SLDPRT]]
|-
|[[Image:Ball Gate Assembly - RT A-8096-R.PNG|200px]]
|Ball Gate Assembly - RT A-8096-R
Solidworks 2013
|[[Media:Ball Gate Assembly - RT A-8096-R.ZIP]]
|-
|[[Image:Flipper Assembly WPC.png|200px]]
|Flipper Assembly WPC (coil is incorrect)
Solidworks 2013
|[[Media:Flipper Assembly WPC.zip]]
|-
|[[Image:Flipper Bat 2inch.PNG|200px]]
|Flipper Bat 2 Inch
Solidworks 2013
|[[Media:Flipper Bat 2inch.zip]]
|-
|[[Image:Flipper Bat 3inch.PNG|200px]]
|Gate Assembly
Solidworks 2013
|[[Media:Gate Assy 0001.zip]]
|-
|[[Image:Opto Base MTG.png|200px]]
|Opto Base Mounting
Solidworks 2013
|[[Media:Opto Base MTG.sldprt]]
|-
|[[Image:PF Test1.PNG|200px]]
|Test PF shooter lane cut
Solidworks 2013
|[[Media:Test PF 1.sldprt]]
|}

= Business Plan =

Documents outlining what it takes to move a pinball project from a hobby to a business

File:Ball Gate Assembly - RT A-8096-R.PNG

2015-06-08T09:12:28Z

BobLangelius: